Neocement®

Product catalog summary

Product Overview
Neocement® is a calcium phosphate cement designed to support bone regeneration. It is characterized by easy handling for targeted defect filling, with a paste-like consistency that allows for direct placement into bone defects. The cement has a controlled hardening process with low exothermic setting, ensuring safety for surrounding tissues.

Technical Specifications

Product Type: Moldable calcium phosphate cement
Chemical Composition: TTCP + β-TCP + Chitosan
Phase Composition: Solid (powder) + Liquid (solvent with chitosan)
Setting Time: 8–12 minutes (in situ)
Porosity: Approximately 40% (interconnected)
Compressive Strength: 8–17 MPa after setting
Radiopacity: Yes
Application: Manual (non-injectable)
Resorption: Gradual, replaced by bone
Reprocessing: Single Use

Application Moments

Filling defects caused by fractures with bone loss
Bone voids in extremities or flat bones
Pseudarthrosis or non-unions
Defects following arthrodesis or osteotomies
Post-curettage cavities (e.g., cysts, tumors)

Intended Use
Neocement® is intended for filling bone defects that do not critically affect the mechanical stability of the skeleton. It is suitable for orthopedic and trauma surgeries where manual placement is possible, and is designed for professional use by orthopedic or trauma surgeons in open surgical procedures.

Manufacturer Information
Bioceramed S.A, located in AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal. Contact: +351 253 573 460, [email protected], www.bioceramed.com

Catalog excerpts

Bone Substitutes | Orthobiologics Neocement® Calcium Phosphate Cement. Supports bone regeneration. Innovating Future Life.

Open the catalog to page 1

Neocement® Easy handling for targeted defect ﬁlling. Manual application Easily moldable cement for direct placement into the defect. Malleable formula Paste-like consistency after preparation. Controlled hardening Low exothermic setting, safe for surrounding tissue. Innovating Future Life.

Open the catalog to page 2

Product Type Moldable calcium Compressive 8-17 MPa phosphate cement Strength (after set) Porosity ~40% (interconnected) Reprocessing Single Use Neocement® is intended for the filling of bone defects that are not critical to the mechanical stability of the skeleton. It is designed for use in orthopedic and trauma surgeries where manual placement of the bone graft is possible. • For professional use by orthopedic or trauma surgeons. • Suitable for open surgical procedures. • Filling defects caused by fractures with bone loss • Bone voids in extremities or flat bones • Defects following arthrodesis...

Open the catalog to page 3

Engineering Regenerative Solutions for Bone Repair. Bioceramed S.A AvePark – Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco, Guimarães, Portugal +351 253 573 460 [email protected] www.bioceramed.com Innovating Future Life

Open the catalog to page 4

All Bioceramed catalogs and technical brochures

Archived catalogs

NEOCEMENT INJECT P
2 Pages
n-IBS
2 Pages