Bio-TackS
6Pages

Minimized Head Design Low height of the head design reduces patient discomfort and maximizes patient comfort r---Straight G/H Shape i Straight G/H shape minimizes the pressure on the gingiva thus enables stable implantation i Enhanced Body Strength 30% Enhanced Body Strength minimizes the possibility of fracture when implanted Stable & Strongi Renovative Bio-Tack S™ Pre-sterilized product allows just in time availability on chair side 30% increased high stability by Optimal Pitch Design maximizes fixation within cortical bone

X Pre-Drilling recommended for preventing fracture during the insertion with 01.4 Suitable for closed coil spring use Small and Rounded Head Design for patient comfort 0 1.4 is suitable during insertion among anterior tooth and root apex S for abbreviation of pre-sterilized product

5K Pre-Drilling recommended for preventing fracture during the insertion with 01.4 Ligation possible with 019*025 wire Hole Size with 0 0.8 (022” wire) Upper hand in stability with 1.75mm neck size diameter S for abbreviation of pre-sterilized product

- Drill Type Used when connecting Finger Handle to insert Bio-Tack S™ Composed of Two Different Finger Hand Shafts : B Type, C Type Used when connecting Finger Hand Shaft and tightening the screw by hands Used when connecting Head piece (Engine) Laser marking: 0 1.2, 0 1.5 - 0 1.2 drilling : Used when 0 1.4, 0 1.6 screw implantation - 0 1.5 drilling : Used when 01.8 screw implantation Drilling speed under 800 rpm recommended In case of high density in the cortical bone, pre-drilling is recommended after insertion Used when connecting Hand piece (Engine) to insert Bio-Tack S™ Composed of...