Single Strap with Wing Seal Double Strap with Wing Seal Contraindications: Absolute (When the product should not be used at all) • Demonstrated sensitivity to hydrocolloid (rare) Relative (When the product can be used after healing) • Unhealed wound at application site (wait to heal) • Active rash at application site (wait to heal) • Active inflammation or infection For use on intact skin. If redness or irritation occurs, stop use and consult a healthcare practitioner. Any serious incident while using this device should be reported to the manufacturer and competent authority. Manufactured by: Bioderm, Inc. 12320 73rd Ct. N., Largo, FL 33773, USA Orders: (800) 814-3174 Support: (800) 864-6755 [email protected] www.BioDermInc.com NOT MADE WITH NATURAL RUBBER LATEX *Not included in part numbers ending with NA ©2019 BioDerm, Inc. All rights reserved. BioDerm® and CathGrip® are registered trademarks of BioDerm, Inc. BioPlus™ is a trademark of BioDerm, Inc. Global Patent EP (UK and NL) 2501429. US and International patents pending. Application Tips Make sure the patient’s skin is COMPLETELY DRY before applying CathGrip®. Cleansing wipes and Chlorhexidine can cause excess moisture underneath the skin that can reduce CathGrip wear time. Make certain that the application site for CathGrip is as dry and moisture free as possible, before applying. Wear time. The first application for each patient will last shorter than the subsequent applications of the product. This is due to the hydrocolloid material that absorbs underlying moisture in the skin. CathGrip can be worn for up to 7 days. Single-Use. Once removed, dispose of in a trash can. Product is not reusable and could cause product malfunction or risk of infection if r

For Best Results Follow the 4 P’s • Prep • Place • Peel • Pull Contents: • 1 Alcohol Wipe* • 1 BioPlus+™ Barrier Wipe • 1 Hydrocolloid Universal Securement Device Clean entire application site with an alcohol wipe and/ or nonmoisturizing soap. Allow to dry. 2 Place Wipe entire application site with BioPlus+TM. Allow 15+ seconds to dry. 3 Peel & Press Make sure the hydrocolloid strap is lifted, Remove the release papers from the revealing the entire tube slot. Place the bottom of the hydrocolloid oval. Press hydrocolloid oval on the skin, sliding it to the skin to seal. until the tube rests at...