SERIES STOOLS This flat vertical surface mounted, swing-away stool features adjustable seat heights and is equipped with a nonskid glide for added steadiness. Available with many optional seat and backrest configurations, 1Y seating is perfect for the industrial environment, school labs, or any place seating is needed that can swing out of the way. This versatile, swing-away stool is mounted to a wall or other solid vertical surface to assure that even the most challenging workstation space can have functional seating. Swing the stool out from the wall to a work position, then swing it back when finished for efficient floor cleaning and traffic space. STANDARD FEATURES Seat: 13" diameter, made of 18-gauge steel with formed flange and no sharp edges, 22 3/4" from floor to top of seat in low position, 20 3/4" from wall to outside edge of seat. Frame: Two-bar unit, 1 1/8" diameter, made of 16-gauge steel tubing. SEAT HEIGHT RANGES 22 3/4" - 28" Metal Parts: Black powder-coated finish; available in other colors. Glide: Nonskid. Seating: Seating options change the low seat height and wall-to-outside edge of seat dimensions. See chart below. Attaching Bracket: 2" wide, made of 7-gauge steel, spring loaded to allow stool base to contact floor only when weight is applied to the unit. OPTIONS Seat Height Adjustment Range Seating Options Wall to Outside Edge Standard Seat 1Y50-Standard - Steel seat Optional Seats - Below are additional seat and backrest options offered on 1Y seating. Additional charges apply. 1Y50-BE - Backrest is 15 1/2” wide x 14 1/2” high, lumbar support, plastic protective panel; seat is concave, 18 1/2” wide x 16 1/2” deep x 3” thick with internal seat board bumperguard. 1Y50-BT - Backrest is 14 1/2” wide x 9 1/2” high, lumbar support, plastic protective panel; seat is concave, 18 1/2” wide x 16 1/2” deep x 3 “ thick with internal seat board bumperguard. Seat Height Adjustment Range Wall to Outside Edge 1Y50-CX - Seat is round, 14” diameter x 1 1/2” thick, self-skinned urethane. 1Y50-EE - Backrest is 15 1/2” wide x 14 1/2” high, lumbar support, plastic protective panel; seat is ergonomic, 18 1/2” wide x 17” deep x 3” thick with waterfall front, four-way contouring and internal seat board bumperguard. 1Y50-ET - Backrest is 14 1/2” wide x 9 1/2” high, lumbar support, plastic protective panel; seat is ergonomic, 18 1/2” wide x 17” deep x 3” thick with waterfall front, four-way contouring and internal seat board bumperguard. Seating Options

Seat Height Adjustment Range Wall to Outside Edge Seat Height Adjustment Range Wall to Outside Edge 1Y50-RT - Backrest is 14 1/2” wide by 9 1/2” high with lumbar support and plastic protective panel; seat is round, 15” diameter, upholstered with 2 1/2” of high-resilience molded foam cushioning. 1Y50-GG – Backrest is 16” wide x 10 3/4” high, 109% larger than the old DuraGrain Series; seat is 17 1/2” wide x 15 1/2” deep, 23% larger than the old DuraGrain Series. 1Y50-RX - Seat is round, 15” diameter, upholstered with 2 1/2”of high-resilience molded foam cushioning and internal seat board bumperguard....