prosthetics catalog
40Pages

why choose BioHorizons prosthetics? Using authentic BioHorizons parts will ensure a precision fit connection between the prosthetic component and implant, avoiding costly component failures that may occur from using third-party prosthetics. Authentic BioHorizons parts are color-coded for easy identification to match the mating implant. authentic connection advantages: • lifetime warranty on all implants & prosthetics • Spiralock® technology minimizes screw loosening • precise mating geometries reduce prosthetic failures • advanced design creates a better engineered connection • color-coded...

engineering better prosthetics BioHorizons prosthetics are engineered and manufactured to seat precisely every time. The conical connection includes a small space between the components to guarantee contact of the abutment and implant around the entire perimeter of the prosthetic platform. This design creates a biologic seal and achieves optimal stress transmission, that protects the abutment screw from fracture and loosening. Laser-Lok technology Conical connection creates a biologic seal around the perimeter of the implant's prosthetic platform Laser-Lok microchannels is a proprietary...

prosthetic technique manual interactive prosthetic technique manual temporary restorations cement-retained crown using a PEEK temporary abutment Use this technique for the fabrication of short term (30 days), cement-retained single or multi unit temporary restorations. Temporaries may be used at the time of surgery, uncovery, or following an implant-level impression. temporary resto component options fabrication ression tray custom imp ect copings ting with indir option 2: star component rch using the el impression coping ch implant-levthe indirect transfer Make a full-ar using technique...

table of contents healing abutments

Hand-tighten with the .050" (1.2 5mm) Hex Driver. Ttanium Alloy. The 3.5mm, 4.5mm and 5.7mm healing abutments are laser marked for easy intraoral identification of the prosthetic platform, emergence and height: Y = Yellow (3.5mm) platform G = Green (4.5mm) platform B = Blue (5.7mm) platform N, R or W = Narrow, Regular or Wide emergence 1,2, 3 or 5 = 1mm, 2mm, 3mm or 5mm abutment height 3.0 healing abutments are not laser marked due to their small size. shop online at store. biohorizons. com

3.0mm platform, hexed 3.5mm platform, hexed 4.5mm platform, hexed 5.7mm platform, hexed 3.0mm platform, non-hexed 3.5mm platform, non-hexed 4.5mm platform, non-hexed 5.7mm platform, non-hexed 3.0 platform all other platforms Use hexed for single-unit; screw retained, long term temporary restorations that require superior esthetics. Use non-hexed for multiple-unit screw retained, long term temporary restorations. When a Laser-Lok component is used and temporarily removed for impression making or other restorative procedures, keep the removed Laser-Lok component in sterile saline until...

3.0mm platform, hexed 3.5mm platform, hexed 4.5mm platform, hexed 5.7mm platform, hexed 3.0mm platform, non-hexed 3.5mm platform, non-hexed 4.5mm platform, non-hexed 5.7mm platform, non-hexed platform platforms Use hexed for single-unit; screw-retained, long term temporary restorations (>30 days). Use non-hexed for multiple-unit screw-retained, long term temporary restorations (>30 days). Packaged with an abutment screw (PXAS).Ttanium Alloy Final torque: 30Ncm. L02015-022 Screw-retained bridge using titanium temporary abutments module Use to create an immediate temporary abutment for...

PYNSC 3 .5mm platform (Narrow Emergence) PYRSC 3 .5mm platform (Regular Emergence) PYWSC 3.5mm platform (Wide Emergence) PGNSC 4 .5mm platform (Narrow Emergence) PGRSC 4.5mm platform (Regular Emergence) PGWSC 4.5mm platform (Wide Emergence) PBNSC 5 .7mm platform (Narrow Emergence) PBRSC 5 .7mm platform (Regular Emergence) Use to make a closed-tray, direct pick-up, implant-level impression. PEEK (PolyEtherEtherKetone) and Ttanium Alloy material. L02015-034 Closed tray pick-up technique using the snap coping module one-piece design Coping easily snaps...

TP3ISC 3.0mm platform (Regular Emergence) TP3WISC 3.0mm platform (Wide Emergence) PYNISC 3.5mm platform (Narrow Emergence) PYRISC 3.5mm platform (Regular Emergence) PYWISC 3.5mm platform (Wide Emergence) PGNISC 4.5mm platform (Narrow Emergence) PGRISC 4.5mm platform (Regular Emergence) PGWISC 4.5mm platform (Wide Emergence) PBNISC 5.7mm platform (Narrow Emergence) PBRISC 5.7mm platform (Regular Emergence) Use to make a closed-tray, implant-level, hexed-timed impression. Pre-assembled with a coping screw (PXSS). Titanium Alloy. L02015-007 Closed tray...

Direct Coping Screws PXDCSS Direct Coping Screw, Shallow Hex Packaged with all Direct Pick-up Copings, except 3.0mm platform, hexed, long (TP3DCL). Short hex depth for easy removal of impression material. May also be used to maintain the screw access hole during fabrication of a screw-retained provisional prostheses. Utilizes the .050" (1.2 5mm) Hex Driver. Hand-tighten or torque to 30 Ncm depending on application. Ttanium Alloy. PXDCS Direct Coping Screw Includes a deeper hex that allows up to 7mm to be prepped without losing the hex engagement. May also be used in place of an abutment...

3.0mm platform, hexed 3.5mm platform, hexed 4.5mm platform, hexed 5.7mm platform, hexed TP3ETNL 3.0mm platform, non-hexed PYETNL 3.5mm platform, non-hexed 3.0 platform all other platforms Use hexed abutments for single-unit, screw-retained or cement-retained, custom abutment restorations. Use non-hexed abutments for multiple unit, screw-retained restorations. When a Laser-Lok component is used and temporarily removed for impression making or other restorative procedures, keep the removed Laser-Lok component in sterile saline until reinserting into the site. Packaged with an...

Use for anterior cases that require a durable, highly esthetic solution. For single-unit screw-retained or cement-retained, CAD/CAM hybrid zirconia restorations. When a Laser-Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Ttanium Alloy for strength. TN coated for esthetics. Final torque: 30Ncm. Note: TP3TBL and TP3TB have 3.0mm platform connections, but the margins flare to 3.5mm. L02015-003 Handling of Laser-Lok abutments module PYTBWSI 3.0/3.5mm platform, indexed (pack of 3)...