SDS
7Pages

Safety Data Sheet Version 3.10 Revised: 2016-05-02 _1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name Taq DNA Polymerase Other means of identification Product Code(s) Synonyms Product Use A1003 No information available For Laboratory Research Use Only. Supplier/Manufacturer Biomatik Corporation 9-140 McGovern Dr. Cambridge, Ontario N3H 4R7 Canada E-mail Address info@biomatik.com Emergency Telephone Number Chemtrec 1-800-424-9300 2. HAZARDS IDENTIFCIATION Classification Classification under 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Based on available data, the classification criteria are not met Label Elements None required Hazards not otherwise classified (HNOC) None identified

Wash off immediately with plenty of water for at least 15 minutes Eye Contact Skin Contact Lower No data available Sensitivity to Mechanical Impact No information available Sensitivity to Static Discharge No information available Specific Hazards Arising from the Chemical Keep product and empty container away from heat and sources of ignition. Hazardous Combustion Products None known Protective Equipment and Precautions for Firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Methods for...

Legend ACGIH - American Conference of Governmental Industrial Hygienists OSHA - Occupational Safety and Health Administration Engineering Measures Personal Protective Equipment Eye/face Protection Skin and body protection Respiratory Protection Hygiene Measures Ensure adequate ventilation, especially in confined areas. Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Wear appropriate protective gloves and clothing to prevent skin exposure. Follow the OSHA respirator...

Hazardous Decomposition Products None under normal use conditions Hazardous Polymerization Hazardous polymerization does not occur. Hazardous Reactions None under normal processing. Based on ATE data, the classification criteria are not met. ATE > 2000 mg/kg. Based on ATE data, the classification criteria are not met. ATE > 2000 mg/kg. Based on ATE data, the classification criteria are not met. ATE > 20 mg/l. _^^11. TOXICOLOGICAL INFORMATION Acute Toxicity Oral LD50 Dermal LD50 Vapor LC50 Component Information Mutagenic Effects Reproductive Effects Developmental Effects Teratogenicity STOT...

Do not empty into drains. Legend: X - Listed E - Indicates a substance that is the subject of a Section 5(e) Consent order under TSCA. F - Indicates a substance that is the subject of a Section 5(f) Rule under TSCA. N - Indicates a polymeric substance containing no free-radical initiator in its inventory name but is considered to cover the designated polymer made with any free-radical initiator regardless of the amount used. P - Indicates a commenced PMN substance R - Indicates a substance that is the subject of a Section 6 risk management rule under TSCA. S - Indicates a substance that is...

Production and Site Reports (40 CFR 710(B). Y1 - Indicates an exempt polymer that has a number-average molecular weight of 1,000 or greater. Y2 - Indicates an exempt polymer that is a polyester and is made only from reactants included in a specified list of low concern reactants that comprises one of the eligibility criteria for the exemption rule. U.S. Federal Regulations TSCA 12(b) Not applicable SARA 311/312 Hazard Categories Acute Health Hazard No Chronic Health Hazard No Sudden Release of Pressure Hazard No CWA (Clean Water Act) Not applicable OSHA Occupational Safety and Health...

Disclaimer The information provided on this MSDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text. End of Safety Data Sheet