The C.PunT system and its accessories The C.PunT medical device is composed of: electromedical instrument for standardizing the process of separation of PRP from other blood components; a disposable kit for treating 55 ml of whole, non-coagulated blood. Accessories of the C.PunT system: disposable kit, sold separately (50/10 ml); cover for housing sensors; power supply cord; dedicated centrifuge. Method for drawing blood and for production Depending on the intended use, on the volume needed, on the possibility or need to freeze the component, the production of hemocomponents for non-transfusional use may call for the installation of devices that differ from those generally adopted to draw blood and hemocomponents (low volume bags, vials for the production of hemocomponents or plasma factors for use on patients). In all cases, the collection, production and application of hemocomponents for non-transfusional use must be performed using CE certified medical devices for specific uses, in compliance with Directive 93/42/CE (class II or superior). Open stages must be avoided or reduced to a minimum. If open stages are envisaged, measures must be adopted to guarantee sterility of the product (sterile connections, processing in a laminar flow cabinet). biomed system Closed, simple and automated system for the preparation of PRP Source: Raccom. SIMTI on hemocomponents for non-transfusional use. Biomed Device products are medical devices and not available to the general public, and must be used only by authorized personnel. Biomed Device reserves the right to change the products at any time, in line with technical innovation and product improvement. This informative material is for the exclusive use of authorized personnel. certified in accordance with European Directives. DISTRIBUTED BY All Medical Devices are Certified in accordance with European Directives (93/42/EEC) Biomed Device is a certified company: BIOMED DEVICE S.R.L. via Vittorio Bottego, 239 - 41126 Modena - Italy tel. +39.059.343929 - fax +39.059.4550010 e.mail [email protected] - www.biomeddevice.it Strada Valenza, 5/A - 15033 Casale Monferrato (AL) - Italy tel. +39.0142.335511 - fax +39.0142.335555 - [email protected] - www.eltekgroup.it

COMPLETELY CLOSED SYSTEM FOR THE PRODUCTION OF PRP FULLY AUTOMATED PROCESS The instrument can be set up to perform the procedure in just a few minutes, thanks to pre-established programs. C.PunT is a system for the separation and concentration of PRP, developed by Eltek Group with the cooperation of Biomed Device. Configuration of the instrument and kit allows for easy use and eliminates the risk of contamination, thanks to the completely closed system. Platelet concentrate The use of platelet concentrate for non-transfusional purposes is based on the regenerative potential of the biomolecules...