*mymedicalexpo

SLIM

Product catalog summary

Bibliographical References

The document cites multiple scientific studies focusing on implant design, osteoblast behavior on titanium surfaces, osteogenic progenitors from amniotic fluid, and osteogenic differentiation protocols. These references support the scientific foundation of the implant system and its biological compatibility.

WINSIX Implant System Overview

The WINSIX Implant System includes two implant diameters: 2.9 mm (SLIM TTSI) and 3.3 mm (TTSI). Both implants can be managed using a single surgical kit that organizes drills and instruments logically for surgical and prosthetic phases, emphasizing ergonomics and efficiency.

Implant Surface and Design

The implants feature a micro-rough surface (MRS) created by sandblasting and etching titanium, promoting osteoconduction and reducing osseointegration time.
The surface has been in use since 2005 across all WINSIX implants.
The SLIM implant has a cylindrical shape with a self-tapping conical apex and a polished collar of 0.7 mm height.
Double-threaded, double-start threads facilitate easier implant placement with fewer turns.

Implant Indications and Applications

The 2.9 mm SLIM implant is designed for very narrow anatomical spaces, such as mandibular central and lateral incisors and maxillary lateral incisors.
It is suitable for cases with thin crests, limited interproximal spaces, orthodontic therapies, and situations where bone regeneration techniques are to be avoided.
Finite Element Analysis confirms the implant withstands chewing loads up to 500N, even under worst-case angulation scenarios.

Connection Technology

Both implant sizes use an internal hex connection with Free Lock technology, established since 1995, ensuring excellent stability and load resistance.

Prosthetic Instruments and Accessories

A comprehensive range of prosthetic components is available for both 2.9 mm and 3.3 mm implants, including:

Extraction instruments, manual screw tighteners, and contra-angle screwdrivers.
Titanium cover screws and healing caps (flared and straight) in various heights.
Straight and angled temporary and final abutments (15° and 25° angles), aesthetic abutments, and castable direct abutments.
Impression copings, pick-up copings with double retention, and standard analogues for accurate prosthetic procedures.
Scan abutments and digital analogues for digital workflows.
WinBase abutments for single screw-retained CAD/CAM prostheses, including versions with long cannulas and rotational variants.
Ball attachments with O-ring systems for retention.
Slim premilled abutments in titanium with internal hex connection.

Prosthetic Screw Types

Prosthetic screws such as VP2SI, VMILSI, VFS, and WDAV are used depending on the component, ensuring secure fixation.

Certifications and Quality Standards

BIOSAF IN, the manufacturer, is certified under ISO 9001, ensuring quality management throughout the production process.
ISO 13485 certification confirms compliance with medical device quality standards, safeguarding both professionals and patients.

Summary of Critical Parameters and Best Practices

Implant diameters: 2.9 mm (SLIM) and 3.3 mm.
Implant heights available: 9 mm, 11 mm, 13 mm, and 15 mm (only for 3.3 mm).
Polished collar height: 0.7 mm.
Micro-rough surface promotes faster osseointegration.
Internal hex connection with Free Lock technology ensures mechanical stability.
Use of a single surgical kit for all WINSIX implants enhances procedural efficiency.
Prosthetic components cover a wide range of clinical needs, including angled abutments and CAD/CAM compatible parts.
Finite Element Analysis supports implant mechanical reliability under load.

For detailed prosthetic accessory information and digital libraries, users are directed to the official website: www.biosafin.com.

Catalog excerpts

WINSIX SLIM INDICATIONS FOR IMPLANTS Ø 2.9 for central and lateral mandibular incisors and maxillary lateral incisors WINSIX® product certifications: UNICO WINSIX SURGICAL KIT SLIM Implant WINSIX Ø2.9 for very limited interproximal spaces The WINSIX Implant System - including the 2.9 mm SLIM TTSI implant and the 3.3 mm TTSI implant may be managed with a single Surgical Kit, inside which the drills and all the instruments necessary for the surgical and prosthetic phase are placed in a logical and clear sequence of use. The instruments remain the same for the entire WINSIX Implant System, and are faithful to the principle of maximum ergonomics and efficiency that distinguishes us. A specific prosthetic series is dedicated to SLIM Implants. MICRO ROUGH SURFACE applied to all WINSIX system implants In use since 2005 applied to all WINSIX System Implants to avoid bone regeneration techniques • It has a rough morphology, produced through a subtraction process, by sandblasting and etching of the titanium. • The special three-dimensional geometry of its microstructure allows for a reduction in the time required for osseointegration, through a process of osteoconduction promoted by the distinctive scaffold characteristics of this surface. in case of orthodontic therapies in case of thin crests BIOSAF IN is a Certified Company: The test, carried out by simulating the WORST CASE of a SLIM 2.9 implant angled 30° with the GH3 straight abutment (a condition that in clinical practice is not carried out thanks to the use of angled abutments), highlights the progress of Von Mises stress, with a load of 500N, obtained with the Finite Element method. The system amply meets the chewing load levels for which it was designed. ISO 9001 standard, which certifies the entire work process from start to finish, further demonstrating compliance with quality standards considered optimal for the protection of the product User – the Professional – and the end user – the Patient. Bone in the active remodelling phase on the MRS surface ISO 13485 specifically relevant to the quality of Medical Devices. Bibliographical References: • Macroscopic and Microscopic evaluation of a new implant design supporting immediately loaded full arch rehabilitation S.Teté, V.Zizzari, A.De Carlo, B.Sinjari, E.F.Gherlone Annali di Stomatologia Vol.3, n.2 - 2012 • Influence of Novel Nano - Titanium Implant Surface on Human Osteoblast Behaviour and Growth S. Tetè, F.Mastrangelo, R.Quaresima, R.Vinci, G.Sammartino, L.Stuppia, Enrico F. Gherlone - Implant Dentistry Vol.19, n.26 - 2010 BIOSAF IN srl [email protected] - biosafin.com OFFICES IN ITALY: MILAN: Via Cagliari 32/44 20060 - Trezzano Rosa - Zona Industriale (MI) Tel. +39 02 90968692 - Fax +39 02 90968541 • Isolation of osteogenic progenitors from human amniotic fluid using a single step culture protocol I. Antonucci, I. Iezzi, E. Morizio, F. Mastrangelo, A. Pantalone, M. Mattioli Belmonte, A. Gigante, V. Salini, G. Calabrese, S. Tetè, G. Palka, L. Stuppia - SILENCE a Journal of RNA regulation - 2009 • In vitro behaviour onto different titanium surfaces of osteoblast-like cells obtained from human dental pulp S. Tetè, F. Mastrangelo, V. Zizzari,G. D’Apolito, N. Fiorentino, U. Desiato, M.T. Sberna, R. Quaresima, L. Stuppia, R. Vinci, E.F. Gherlone - Atti del 7th Annual Meeting of ISSCR International Society of Stem Cell Research, Barcelona, July 2009 • Novel Protocol of Osteogenic differentiation from amniotic fluid cells S. Tetè, F. Mastrangelo, M. Tranasi, V. Zizzari, I. Antonucci, G. D’Apolito, T. Marchese, R. Vinci, L. Stuppia, E.F. Gherlone Atti del 7th Annual Meeting of ISSCR International Society of Stem Cell Research, Barcelona, July 2009 • Interfaccia osso - impianto nei differenti tipi di carico degli impianti dentali S. Tetè, G. D’Apolito, F. Mastrangelo, R. Vinci, E.F. Gherlone - Atti del III Expo di Autunno, Università della Lombardia, 27 - 28 Novembre 2009 • Valutazione della capacità osteogenetica di hafscs ottenute da liquido amniotico S. Tetè, U. Di Tore, V. Zizzari, L. Stuppia, F. Zarone, E.F. Gherlone - Atti del III Expo di Autunno, Universit

Open the catalog to page 1

PROSTHETIC INSTRUMENTS AND ACCESSORIES PROSTHETIC INSTRUMENTS AND ACCESSORIES PROSTHETIC INSTRUMENTS AND ACCESSORIES The 0 2.9 - TTi SLIM implant with SLIM internal hex connection - expands and completes the WINSIX Torque Type Implant Line, to meet the needs of Dentists in cases of implant insertion in very narrow anatomical spaces. The SLIM 2.9 implant is only indicated for the mandibular central and lateral incisors and maxillary lateral incisors. Item Code Product Item Code Product Item Code Product Item Code Product Item Code Product Item Code Product double-threaded and double-start threads...

Open the catalog to page 2

All Biosafin catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list