Catalogs >
Biosan >
FTA-1, Aspirator with trap flask

FTA-1, Aspirator with trap flask
1 / 2Pages

Catalog excerpts

Biosan SIA., Ratsupites 7, build. 2, Riga, LV-1067, Latvia, Phone: +371 674 261 37, Fax: +371 674 281 01, E-mail: marketing@biosan.lv, www.biosan.lv FTA-1, Aspirator with trap flask DESCRIPTION Aspirator with trap ﬂask FTA-1 is designed for aspiration/removal of alcohol/buﬀer remaining quantities from microtest tube walls during DNA/RNA purification and other macromolecule reprecipitation techniques. The device can be used also for routine operations of cells washing from culture medium and resuspension in buﬀer. Aspirator operation principle is based on creating negative pressure in trapping ﬂask using built-in microcompressor. The collecting tip is connected with polyethylene tube to the trapping ﬂask. Liquid is removed from the microtest tube when the collecting tip touches the solution surface. A tube holder-organizer is conveniently located at FTA-1 right hand side; it accommodates two tubes (e.g. for hydrochloric acid solution and distillate) necessary for collecting tip washing and storing, so that a tip can be re-used. Suction microbiological hydrophobic filter type 2200/02: Suction microbiologic ﬁlter eliminated risk of contamination with bacteria, viruses and infected particle from patient to suction pump or central vacuum distribution. Suction microbiological ﬁlter is hydrophobic with very high bacterial eﬃciencies up to 99.99999% particles bigger than 0.027 µm (which is smaller than Hepatitis A, B and C). 230VAC 50/60Hz UK plug, 230VAC 50/60Hz AU plug, 100VAC 50/60Hz US plug, 120VAC 60Hz US plug SPECIFICATIONS Vacuum Trap flask Dimensions with trap flask (W×D×H) Weight with trap flask Input current/power consumption External power supply 8-channel aspiration tip with holder, autoclavable FTA-1, Aspirator with trap

Open the catalog to page 1