RISE™ NC

RISE™ NC

RISE™ NC

Product catalog summary
Product Overview: The document provides information on the Rise NC, a non-compliant PTCA balloon catheter by Biosensors International Group, Ltd. It is CE Mark approved and intended for use by or under the direction of a physician. The product is not available in the United States or any country without applicable health authority registration.
Key Specifications:
  • Catheter Design: Rapid Exchange
  • Usable Shaft Length: 142 cm ± 3 cm
  • Proximal Shaft Profile: 2.1 F / 0.0274” / 0.70 mm
  • Lesion Entry Profile: 0.018" / 0.46 mm
  • Crossing Profile: ≤0.051”
  • Nominal Pressure: 14 atm / 1419 kPa
  • Rated Burst Pressure: 20 atm / 2027 kPa (2.00 - 4.00 mm balloon diameter), 18 atm / 1824 kPa (4.50 mm balloon diameter)
Features:
  • Designed for easy crossing and tracking performance in tortuous vessels.
  • High pressure inflation capability for resistant lesions.
  • Precise positioning for bifurcation optimization.
  • Shaft designed for enhanced pushability.
Ordering Information: The document includes a detailed table listing various balloon sizes and lengths, along with their corresponding product codes.
Contact Information:
  • Biosensors Europe SA, Switzerland: Tel: +41 (0)21 804 80 00
  • Biosensors Interventional Technologies PTE LTD, Singapore: Tel: +65 6213 5777
See more

Catalog excerpts

RISE™ NC-1

Ordering Information Balloon size (mm) Balloon length (mm) 1: Data on file at Biosensors International Group, Ltd. Rise NC is a trademark or registered trademark of Biosensors International Group, Ltd. Rise NC is CE Mark approved. CAUTION: ﬔe law restricts these devices to sale by or on the order of a physician and these products are intended for the use by or under the direction of a physician. Indications, contraindications, warnings and instructions for use can be found in the product labeling supplied with each device. Not available in the United States and any other country where applicable health authority product registration has not been obtained. Information contained herein only for presentation outside the US and France. © 2019 Biosensors International Group, Ltd. All rights reserved. Printed on sustainable FSC® paper source. BIOSENSORS INTERVENTIONAL TECHNOLOGIES PTE LTD 36 Jalan Tukang Singapore 619 266 Tel: +65 6213 5777 Fax: +65 6213 5737 CONFIDENCE DELI

 Open the catalog to page 1
RISE™ NC-2

Confidence for your procedure RISE NC’s deliverability and durability will accompany you in even the most challenging cases TM Easy crossing Low profile tip for crossing & tracking performance Precise positioning for bifurcation optimisation Shaft designed for ensured pushability Tortuous vessel navigation Trackability delivered by a low profile balloon For even the most resistant lesions High pressure inflation at 20 atm rated burst pressure Key Technical Specifications1 Catheter design Usable shaft length Proximal shaft profile Lesion entry profile Crossing profile the latest Biosensors International...

 Open the catalog to page 2
RISE™ NC-3

Ordering Information Balloon size (mm) Balloon length (mm) 1: Data on file at Biosensors International Group, Ltd. Rise NC is a trademark or registered trademark of Biosensors International Group, Ltd. Rise NC is CE Mark approved. CAUTION: ﬔe law restricts these devices to sale by or on the order of a physician and these products are intended for the use by or under the direction of a physician. Indications, contraindications, warnings and instructions for use can be found in the product labeling supplied with each device. Not available in the United States and any other country where applicable...

 Open the catalog to page 3

All Biosensors International catalogs and technical brochures

  1. Powerline™

    2  Pages

  2. BioPath 035

    2  Pages

  3. BioStream

    2  Pages

  4. CHROMA

    2  Pages

  5. BioFreedom

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.