C-Chamber
2Pages

Incubator Subchamber CytoCentric Products • Optimized for gas efficiency • Fast recovery time • Four standard sizes • No complicated “flushing” procedures • Magnetically sealed door - no latches! • Disassembles for easy cleaning and decontamination • Humidity pan provided Provides Controlled, Isolated Environments for Your Incubator MULTIPLE EFFICIENCIES The C-Chamber is the foundation of the cytocentric subchamber cell culture system. It is functionalized by any of our gas controllers (for all bioactive gases, e.g. O2, CO2, CO, NO, etc.) OPTIMIZATION & PROTECTION IN STANDARD INCUBATORS After the door is closed, our gas controller(s) will quickly restore the atmosphere inside the C-Chamber to your pre-programmed settings, minimizing the time your cells are exposed to room oxygen levels. If used with a cytocentric superchamber system, exposure to room oxygen levels is removed entirely. EASY TRANSPORT The C-Chamber’s space-efficient design allows you to culture as few or as many plates as you require in precise conditions with minimal gas usage. Extreme oxygen levels consume large amounts of gas in a full incubator or glovebox chamber. PRACTICAL FOR INCUBATORS Chamber trays, water pan, guides and hardware are all made of 300 series stainless steel. The chamber is made of clear polycarbonate and the door seal is magnetic. Temperature is controlled by the host incubator. C-Chamber sits inside your incubator, and is connected to the controller which sits outside the incubator. C-Chamber can be removed from incubator and transported to remote locations without risk of disruption or contamination of c

C374 The C-Chamber works with almost every BioSpherix controller. The universal cutout accommodates control from independent CO2 (ProCO2 P120), to independent O2/CO2 (ProOx C21, ProOx P110 and ProCO2 P120), to dynamic O2 (OxyCycler C42, OxyCycler GT41), and even the gasotransmitters CO and NO (OxyCycler GT81CN, OxyCycler GT81C, OxyCycler GT81N). C-Chambers are stocked in the following sizes: Part Number Description Size (Outer Dimensions) 1-shelf chamber 2-shelf chamber 3-shelf chamber 4-shelf chamber Each tray has a usable surface area for plates of 12.75” x 10.25” with a 2” clearance...