Catalog excerpts
Incubator Glove Box CytoCentric Products • Full Time O2/CO2 Optimization • Full Time Protection • More Consistent Data • Quick O2/CO2 Recovery • Maximum User Comfort • Ample Workspace • Accommodates Subchambers • No Disturbance When Incubator Is Opened Cells are brought into the I-Glove via subchambers. The buffer chamber matches the workspace setpoint, then cells are accessed from the interior door. O2 and CO2 (optional) Optimized Incubation and Processing CYTOCENTRIC ALTERNATIVE TO HOODS The incubator is an essential part of the cell culturing process. The only drawback is the exposure to ambient air. Processing cells contained solely in an incubator is widely accepted, though it creates numerous complications. FULL TIME OPTIMIZATION Primarily, the optimal atmospheric environment inside the incubator is disturbed whenever the door is opened. Secondly, a large amount of gas is required to restore the contained atmosphere to optimal conditions (especially hypoxia). Lastly, cultures are usually manipulated in a hood outside the incubator under suboptimal conditions. FULL TIME PROTECTION The I-Glove is a valuable, affordable solution to these problems. It is a large glove box in which your incubator sits. Identical conditions can be controlled both inside and outside the incubator allowing cultures to be manipulated under optimal conditions. This process removes the necessity of a hood and consumes minimal gas. This means the control range of the incubator is also easily controlled. Inside the I-Glove, extreme oxygen levels are easily main
Open the catalog to page 1Installation Schematic Pictured with optional Continuous Recirculating Atmosphere Conditioner (CRAC) P120 The I-Glove provides a workspace equivalent to the size of a standard small hood. The technician works with gloves that are seam-welded into a clear plastic window to maximize visibility, and ambient room lighting. The flexibility of the window allows maximum mobility and comfort. Atmospheric conditions inside the I-Glove can be controlled to optimize O2/CO2 conditions outside the incubator. The I-Glove is separated from outside air by a buffer chamber. Aseptic conditions, as well as...
Open the catalog to page 2Cells removed from normal incubator and handled in normal hood are exposed to suboptimal conditions. Cells removed and handled from incubator in I-Glove are never exposed to suboptimal conditions. I-GLOVES PROTECT THE RESEARCHERS Cells are often purposely grown and processed to generate or test viruses and vectors. More worrisome is when cells are unknowingly infected with viruses or other transmissible agents. C-Chambers will limit exposure to harmful viruses, vectors and prions where conventional open labs allow the technicians to breathe potentially dangerous non-cellular biological...
Open the catalog to page 3Complete System Parts • Right hinge or left hinge configurations • Single or Dual user COMPLETE SYSTEM - A nitrogen gas supply is necessary for hypoxia. If CO2 control is necessary, a tank of CO2 is also required, as is a CO2 controller to control it. (Incubator not included). Two user configuration is best located on an island or a peninsula counter top to achieve access on three sides. • O2 and/or CO2 control in buffer chamber only • O2 and/or CO2 control in glove chamber in addition to buffer chamber • Continuous recirculating atmosphere conditioner Dimensions CONTROLLERS - Oxygen...
Open the catalog to page 4All BioSpherix Ltd. catalogs and technical brochures
-
Animal Equipment Catalog
18 Pages
-
CELL RESEARCH PRODUCTS
26 Pages
-
Xvivo System
1 Pages
-
OxyStreamer
2 Pages
-
ProCO2 P120
4 Pages
-
ProOx P110
4 Pages
-
ProOx P360
4 Pages
-
ProOx C21
4 Pages
-
OxyCycler C42
4 Pages
-
I-Hood
2 Pages
-
OxyCycler GT41
4 Pages
-
Oxycycler GT4181N
4 Pages
-
Oxycycler GT4181C
4 Pages
-
C-Chamber
2 Pages
-
C-SHUTTLE
4 Pages