*mymedicalexpo

MRCatalogue

Product catalog summary

Overview: This document provides detailed specifications and components for various types of MR Implants, including Micro Thread, Single Thread, Narrow Ridge, Ball Type (Denture), and associated components. It also covers surgical instruments and procedures related to these implants.

1. MR Implant Types:

Micro Thread Type: Available in diameters of 2.5mm and 3.0mm with lengths ranging from 8.5mm to 13.0mm. The G/H (Gingival Height) options are 2.5mm and 4.0mm.
Single Thread Type: Similar specifications to Micro Thread Type with the same diameter, length, and G/H options.
Narrow Ridge Components: Includes lab analogs, plastic temporary caps, burn-out cylinders, and plastic impression coping for precise impressions.
Ball Type (Denture): Available in diameters of 2.5mm and 3.0mm with a consistent G/H of 2.5mm or 4.0mm and height of 3.85mm.

2. MR Implant Denture Components:

Retainer Cap Set: Includes a retainer cap and O-ring.
O-ring: Supplied as a single piece.

3. Locator Abutment:

Available in diameters of 3.75mm with G/H options from 1.0mm to 5.0mm. Screws are M1.6 or M2.0 depending on the model.

4. Biotem Onebody Kit (BOK):

Includes various drills, torque drivers, machine drivers, and parallel pins for implant procedures.

5. Surgical Instruments:

Includes torque drivers, machine drivers, depth gauges, and ratchet wrenches. Instruments are designed for high visibility and precision during surgery.

6. Drilling Sequence:

Details the sequence for different bone qualities (soft, normal, hard) and implant types (Narrow Ridge, Denture, Provisional) with specific drill sizes and lengths.

Contact Information: The document provides contact details for the head office and factory located in Korea.

Catalog excerpts

04 MR Implant Micro Thread Type 05 MR Implant Single Thread Type 06 MR Implant Narrow Ridge Components 07 MR Implant Ball Type (Denture) 08 MR Implant Denture Components 09 Locator Abutment 10 Locator Abutment Components 11 Biotem Onebody Kit (BOK) 12 Surgical Instruments 13 Surgical Instruments 14 Drilling sequence

Open the catalog to page 2

MR Implant Micro Thread Type MR Implant Single Thread Type Micro Thread Type Single Thread Type H

Open the catalog to page 3

MR Implant Narrow Ridge Components MR Implant Ball Type (Denture) Plastic Impression Coping Ball Type (Denture) H • Precise impressions Plastic Temporary Cap • Fabricate provisional prosthesis Code BOPTC Lab Analog • Implementing the oral MR implant narrow ridge abutment on the working model Code MRPLA Burn-out Cylinder • Can be used as the framework for a prosthesis • Used to clean the margin of a casted prosthesis

Open the catalog to page 4

MR Implant Denture Components Locator Abutment Fixture level • Packing unit : Retainer cap + O-ring O-ring • Packing unit : O-ring 1 piece Regular O-ring Lab Analog • Make Oral Ball abutments on the working model • Packing unit : Lab analog Code MRBLA Fixture level

Open the catalog to page 5

Locator Abutment Components • Packing unit : Metal Replacement Male Lance Drill • Packing unit : Blue Replacement Male • Retention Force : about 10±5N Driver Separator Code Torque Driver BOPTDS BOPTDL Machine Driver BOPMDS BOPMDL • Packing unit : Pink Replacement Male • Retention Force : about 20±5N Code BLRMP Torque Driver Machine Driver BOBTDS BOBTDL BOBMDS BOBMDL Bottom Components • Packing unit : Clear Replacement Male • Retention Force : about 30±5N Depth Gauge Ratchet wrench

Open the catalog to page 6

Surgical Instruments Surgical Instruments Driver for Denture Type • Driver for MR implant denture • High visibility during surgery with laser markings at 8, 10, 11.5, 13, and 15, measurements correspond to the length of MR implants. • Connect by matching up the triangle marker with the cross section of the implant (as shown) • The Lance Drill is for cortical bone only; however, it is possible to drilling up to marker depending upon the surgical situation. Torque driver Lance drill Lance drill Straight Drill Torque driver Machine driver Machine driver Straight Drill Gauge for MR Implant • Depth...

Open the catalog to page 7

Drilling sequence (Length : 10mm) Narrow Ridge | Denture | Provisional Bone Quality Lance Drill Soft Implant Placement Normal Hard Bone Quality Lance Drill Soft Implant Placement Normal Hard

Open the catalog to page 8

HEAD OFFICE Woolim Lions Valley #A-504, Sagimakgol-ro 45 beon-gil 14, Jungwon-gu, Seongnam-shi, Gyeonggi-do, Korea Tel. +82-2-6278-3050 ~ 1 Fax. +82-2-6278-3052 FACTORY 422, Sasang-ro, Sasang-gu, Busan, Korea Tel. +82-70-8220-4934 Fax. +82-51-908-8257

Open the catalog to page 9

MRCatalogue

MRCatalogue

Catalog excerpts

All BIOTEM.Co.,Ltd catalogs and technical brochures