*mymedicalexpo

Passeo-35

Product catalog summary

Overview: The document provides detailed specifications and features of the Passeo-35 PTA Balloon, a medical device used for vascular interventions, particularly in peripheral arteries. It highlights the device's design, material, and application areas.

Specifications: The Passeo-35 features a low-profile design compatible with 5F and 6F sheaths, offering a wide range of balloon diameters (3 - 10 mm) and lengths (up to 200 mm). The balloon is made from a puncture-resistant semi-crystalline polymer (SCP) with controlled compliance, suitable for treating calcified lesions.

Design and Material: The balloon has a 5-fold folding design with a hydrophobic patchwork coating to enhance crossability and minimize slippage during inflation. The shaft is 5F with a dual-lumen design and hydrophobic coating for improved flush capability and angiographic quality.

Applications: The device is indicated for use in lower limb, renal, and iliac arteries, as well as for treating arterio-venous dialysis fistulae. However, it is not TGA approved for use within the renal and common iliac arteries in Australia.

Technical Data: The catheter type is OTW with a recommended guide wire of 0.035". It features a soft, short, tapered, colored tip and two swaged balloon markers. The usable catheter lengths are 80, 90, and 130 cm.

Performance Parameters: The nominal pressure for the balloon is 7 atm, with rated burst pressures varying from 11 to 20 atm depending on the balloon size. The compliance chart provides detailed pressure ratings for different balloon diameters and lengths.

Ordering Information: The document includes detailed ordering codes for various balloon sizes and catheter lengths, specifying availability and pre-order requirements.

Contact Information: For ordering and inquiries, contact BIOTRONIK AG, located in Bülach, Switzerland, with provided phone and fax numbers, and email address.

Catalog excerpts

Vascular Intervention // Peripheral PTA Balloon/0.035"/OTW Indicated for lower limb, renal1 and iliac1 arteries reatment of arterio-venous dialysis fistulae T Low profile, wide range: ø 3 - 10 mm and up to 200 mm balloon length Puncture resistant balloon material for most calcified lesions shaft for uncompromised flush capability and angiographic quality 5F Patchwork coating for enhanced crossability Australia: not TGA approved for use within the renal and common iliac arterie

Open the catalog to page 1

A unique PTA Balloon to dilate most resistant lesions in complex anatomy Passeo-35 features a low profile design for 5F and 6F Sheath compatibility, a wide range of balloon diameters (3 - 10 mm) and lengths of up to 200 mm. Above all, with its puncture resistant balloon material, Passeo-35 competes in most calcified lesions. Low profile and wide range - as best in class A comprehensive choice of 5F and 6F configurations. Catheter 80, 90 and 130 cm 0 3.0 - 7.0 mm Shaft design Puncture resistant balloon material A robustly engineered balloon that provides effective dilation; suitable for most calcified...

Open the catalog to page 2

Technical Data Balloon catheter Catheter type OTW Recommended guide wire 0.035" Tip Soft, short, tapered, colored Balloon material SCP (Semi-Crystalline Polymer), controlled compliance Balloon coating Hydrophobic patchwork coating Balloon markers 2 swaged markers Shaft 5F, hydrophobic coating, dual-lumen Guide wire lumen Hydrophobic coating 4 8 weeks pre-order only Balloon Catheter length 130 cm 0 (mm) Balloon length (mm) Passeo-35 is part of the BIOTRONIK ^ Solutions portfolio, including: ■ Introducer Sheath: Fortress ■ Balloons: Passeo-35 HP ■ Stents: Dynamic,...

Open the catalog to page 3

Passeo-35

Passeo-35

Catalog excerpts

All Biotronik catalogs and technical brochures

Archived catalogs