Product Overview
The Rigid Reamer Set is a reusable orthopedic system made from German stainless steel, designed for medullary canal preparation during intramedullary nailing. It is used by orthopedic trauma surgeons to enlarge the femoral or tibial canal before nail insertion. The set is suitable for trauma operating rooms, orthopedic hospitals, teaching centers, and implant-service inventories.

Design & Functional Characteristics
The set features an interchangeable medullary reamer head with a flexible shaft that follows the bone's natural curvature. This design minimizes eccentric paths against the endosteal cortex. The reamer heads advance rotationally, removing cancellous bone first and then contacting the cortical isthmus.

Head Diameters & Shaft Pairing
The set includes fourteen cutting heads ranging from 7.0 mm to 13.5 mm in 0.5 mm increments. Smaller heads (7.0–9.0 mm) use shaft BS-507.01, while larger heads (9.5–13.5 mm) use shaft BS-507.02.

Set Composition
The set includes two shafts and fourteen reamer heads, each with specific diameters, along with an empty container for storage.

Technical Specifications
The Rigid Reamer Set is classified as a reusable manual orthopedic instrument. It is made from J2 German stainless steel with a satin finish and requires steam autoclave sterilization. The set comes with a one-year manufacturing warranty.

Reprocessing & Quality Controls
The instruments require immediate post-procedure cleaning, disassembly, and sterilization. Reprocessing personnel must inspect for debris, damage, and secure engagement. The set is CE marked and manufactured under an ISO 13485 quality-management system.

Technical Notes
There are inconsistencies in the diameter range and shaft coding in the source text. These should be confirmed before regulatory or customer release. Sterilization parameters are facility-specific and should be validated accordingly.