Website:
BLOCK Technology
Catalog excerpts
Glove Tester Device for glove integrity testing.
Open the catalog to page 1
Dimensions Glove Tester Glove Tester Dimensions in mm Width
Open the catalog to page 2
The tester is used to test the leak tightness of gloves in oval flanges. This testing is specifically performed for isolators and microbiological boxes. The principle of the leak tightness test consists of testing the pneumatic tightness of gloves: pressurizing them at a set value, reading the pressure loss and evaluating the difference. The mechanical glove tester consists of a base with an inflatable seal along its perimeter, an output for compressed air into the sleeve and an input for the digital pressure sensor. There is also a flange with two buttons for pressurising and deflating the...
Open the catalog to page 3
Inflatable seal indicator Pressurized air Inlet Pressure glove inlet/outlet Inflatable seal Inflatable seal inlet/outlet Handle The tester measures a drop in pressure over time. If the pressure drops over the assigned limit an alarm is displayed. A recording of the displayed values must be performed manually as a part of prepared protocol.
Open the catalog to page 4All BLOCK Technology catalogs and technical brochures
-
BLOCK Technology_overview2 Pages
-
BLOCK Technology_Company profile21 Pages
