MR2, MR3
2Pages

Catalog excerpts

MR2 / MR3Rotary Microtomes MR2=Manual Operation MR3=Motorized or Manual MR2 & MR3 Supplied Complete with High/Low Profile Disposable Steel Blade Holder and Specimen Holder (choice of Cassette Clamp or Fixed Jaw Vise Clamp) Wide range of accessories for Histology, Materials and Forensic Applications FEATURES ♦ Heavy base casting to reduce vibration ♦ Vertical cutting stroke with solid cross roller bearing specimen carriage ♦ Digital Section Counter Display ♦ Touch Screen Control Panel with Easy to Clean Membrane Switches ♦ Section Thickness range 0.5 - 60 microns ♦ Electronic Feed with Fast Return ♦ Separate Trim Control Function with Footswitch ♦ Preset Trim Setting for Fast Block Trimming ♦ Removable Waste Tray 4650 S. Butterfield Drive • Tucson, Arizona 85714 USA E-mail: info@boeckeler.com • www.rmcboeckeler.com © 2015 Boeckeler Instruments, Inc. Boeckeler is a registered trademark of Boeckeler Instruments, Inc., Tucson, Arizona. All other trademarks are the property of their respective owners. All specifications subject to change without notice.

Open the catalog to page 1

Maximum Specimen Size: Cutting Stroke: Electronic Feed of Knife Stage: Handwheel Lock: Positive lock at 12:00 o’clock or 6:00 o’clock position by pulling out black hand wheel lock knob on left side of microtome. Specimen Orientation: x and y axis with 8 × tilt plus rotation Power Supply: Input 100-240 VAC, 50/60 Hz, 0.8 Amps Output 24 VDC, 36 Watts Additional Specifications for MR3: Variable cutting speed from 0 – 400 mm/second Footswitch control for both Cut & Trim Functions 4650 S. Butterfield Drive • Tucson, Arizona 85714 USA Phone: 520.745.0001 • Fax: 520.745.0004 • E-mail:...

Open the catalog to page 2