Dental Implant

Bonegraft Biomaterials was Co. has become one of the global leaders in synthetic and bioresorbable biomaterials. Bonegraft Biomaterials Co. has also been manufacturing SLA Plasma Active Dental Implant that accelerates osseointegration process. Our production facility is accredited according to ISO-13485 and ISO-9001 Quality management standards and all of our products carry CE mark.

Sandblasting and etching processes applied to the implant surface ensure the adhesion of the fibrin tissue to the surface. Optimum roughness enables implant-tissue adhesion which significantly reduces osseointegration process. HYDROPHILIC SURFACE After with plasma treatment, dental implants become a surface with low surface tension and increased hydrophilicity The surface roughness increases after plasma treatment. After the plasma treatment, the implant is kept in the solution to maintain the surface activation of the implant. After the implant is removed from the solution, the chemical activity...

Plasma treatment reduces the surface wetting angle and increase hydrophilicity. Hydrophilic surface enhances cell adhesion and proliferation on dental implants. Therefore, accelereted osseointegration can be achived. In addition to conventional sandblasting and etching processes applied to the dental implant surface, the SLA active surface is subjected to plasma treatment, which significantly increases the surface activation. Compared to the SLA surface, the SLA-active surface becomes rougher and more hydrophilic, greatly accelerating the osseointegration process.

Implant design provides optimum primer stability BEVELED NECK It prevents bone loss by reducing the stress in the neck area. It collects bone particles and distributes them throughout the body. Optimum roughness, fast osseointegration process, low contact angle, high hydrophilic surface.

High strength results were obtained from mechanical tests performed in accordance with IS014801 and TS/ISO 13498 Standards. SWITCH PLATFORM Stress-relieving platform in the neck area Internal grooves to hold the fittings together with the root M1.8 Hexagonal indexing for anti-rotation safety

STRAIGHT ABUTMENT angled abutment0 0: Profile Diameter P: Straight Height C: Gingiva Height 0: Profile Diameter P: Straight Height C: Gingiva Height

Power-396.5000016-01 SCAN ABUTMENT 04,0-9,00 MM Power-396.5000014-05 Scan Analog Power-396.5000016-02 SCAN ABUTMENT 04,0-13,00 MM ti-base abutment TITANIUM HOUSING

multi-unit angled abutment 0: Profile Diameter C: Gingiva Height MULTI UNITTi-FACE Power-396.5000015-11 Titanium Face Screw (M1,4) for MUA MULTI-UNIT STRAIGHT ABUTMENT IMPRESSION COPING FOR CLOSE-TRAY FOR MUA Power-396.5000013-05 IMPRESSION COPING FOR OPEN-TRAY FOR MUA

healing abutment IMPRESSION COPING FOR CLOSE-TRAY (TRANSFER TYPE) 0 : Profile Diameter H : Height — implant level 0: Profile Diameter H : Height IMPRESSION COPING FOR OPEN-TRAY (PICK-UP TYPE) Power-396.5000026-07_05,0/H=2

SURGICAL DRILL 2,8 MM Power-396.5000087 N SURGICAL DRILL 3,1 MM

Depth Gauge Implant Driver (AA-2,3MM) for Motor Short Implant Driver (AA-2.3MM) for Motor Long Implant Driver (AA-2.3MM) for Motor Short Implant Driver (AA-2.3MM) for Motor Long Universal screwdriver (AA-1,2MM) for Motor Short Universal screwdriver (AA-1,2MM) for Motor Long Universal screwdriver (AA-1,2MM) for Motor Short Universal screwdriver (AA-1.2MM) for Motor Long Multi-unit Abutment Holder Drilling Extention Torque Wrench STOPPER for SURGICAL DRILL for 6 MM STOPPER for SURGICAL DRILL for 8 MM

powerbone®Dental Implant for websiteftf) / powerbonedentalimplant 111 / powerbonedentalimplant fgsi M.O.S.B 4. Kisim Kegilikoy OSB Mahallesi ismail Kahraman Cad. No:1 P.C: 45030 Yunusemre / Manisa / TURKiYE