Specifications:
The 10X252 is a ø10 mm slotless brushless motor with a 4-pole design. It operates at a voltage supply of 24V and has a no-load speed of 28,530 rpm with a no-load current of 39 mA. The motor's maximum continuous torque is 4.0 mNm, and it can handle a maximum continuous current of 0.59 A. Its nominal speed is 23,904 rpm, with a nominal torque of 3.5 mNm and a nominal current of 0.51 A. The nominal output power is 8.7 W, and it has a power density of 4.39 W/cm3. The motor achieves a maximum efficiency of 76.6%.

Thermal Data:
The motor operates within an ambient temperature range of -40°C to 100°C, with a maximum winding temperature of 155°C.

Mechanical Data:
The mechanical time constant is 1.88 ms, and the motor can reach a maximum speed of 85,000 rpm. It features ball bearings with a preload of 1 N. The maximum axial load (dynamic) is 0.5 N, and the maximum axial force for press fits (static) is 5.9 N. The maximum radial load is 4.7 N at 5 mm from the flange.

Miscellaneous:
The motor has 4 poles and 3 phases, with a rotor inertia of 0.122 g·cm2. The typical noise level is 30 dB(A) at 25,000 rpm, and the motor weighs 13 g.

Connection:
The motor has connections for three phases and optional Hall sensors. Phase connections are on pins 8, 7, and 6, while Hall sensor connections range from 2.8 to 24 VDC on pin 1, with GND on pin 5, and sensors on pins 3, 4, and 2.

Note: Specifications are subject to change without notice.