Presentation boso TM-2450
1 / 32Pages

Catalog excerpts

Presentation boso TM-2450 - 3

24h Blood Pressure Monitor boso TM-2450 New packaging concept Sustainable and clearly arranged

Open the catalog to page 3
Presentation boso TM-2450 - 4

24h Blood Pressure Monitor boso TM-2450 Cuffs New sizes. New design. Can be washed off and is latex-free. S | M | M-right | L | XL Cuffs Size M Size M-right Size L Size XL Size S Protective covers (10 pieces) Size M left and right Size L Size XL Size S Size M and Size L (each 5 pieces)

Open the catalog to page 4
Presentation boso TM-2450 - 5

24h Blood Pressure Monitor boso TM-2450 Varta Premium Batteries 2100 mmAh / 600 measures The VARTA Recharge Recycled Batteries are made from 11% recycled material and combine the benefits of low self-discharge with environmental friendliness. Varta Premium Charger Safety switch-off 4 charging slots

Open the catalog to page 5
Presentation boso TM-2450 - 6

24h Blood Pressure Monitor boso TM-2450 Scope of delivery 24-hr blood pressure monitor boso TM-2450 Transport case Battery charger 2 x battery packs with two batteries (one set already inserted into the device) Cuffs for adults (can be washed off, latex-free) - Size M (13 x 62 | 20 – 31) - Size L (16 x 68 | 28 – 38 ) - Cuffs, optional: S (10 x 38 | 15 – 22), XL (17 x 76 | 36 – 50) Hip bag with removeable strap and belt Software für Die leistungsstarke Blutdruckkontrolle die PC-gestützte achung. und Therapieüberw Kompatibel mit tem 100 PWV 100 | boso ABI-sys system boso ABI-system PC 2 |...

Open the catalog to page 6
Presentation boso TM-2450 - 7

24h Blood Pressure Monitor boso TM-2450 High-performance and effective - Measures during pumping and drain process - Arrhythmia detection - Activity sensor - Quick and easy programming - Freely programmable intervals - Sleep button - Storage of 600 measurements - Great wearing comfort thanks to the small and lightweight design with only 2 batteries - Extremely low noise level - Ergonomic hip-bag including transport strap and belt 20.5% smaller 22,5% lighter 33% quieter compared to the previous model boso TM-2430 PC 2

Open the catalog to page 7
Presentation boso TM-2450 - 8

24h Blood Pressure Monitor boso TM-2450 Overview Device Dimensions Weight Adapter socket Measurement storage Connection cable Battery Battery charger Cuff sizes Compatible cuffs Air connection plugs Transport case Pump volume Measuring function Temperature sensor Air pressure Arrhythmia detection Activity sensor Pressure curve On/off switch Reset button TM-2430 PC 2 72x27x100 mm 155 g Jack 350 Jack to USB 3 pieces 4 batteries S|M|L no identical Plastic loud drain no no no no no yes yes TM-2450 66x25x95 mm 135 g micro-USB 600 Micro-USB to USB 2 pieces 4 batteries S | M | L | XL no identical...

Open the catalog to page 8
Presentation boso TM-2450 - 9

24h Blood Pressure Monitor boso TM-2450 Device overview Cuff connection socket START/STOP button AUTO button (day/night button) Battery compartment 2LR6 (AA) batteries Micro USB connection

Open the catalog to page 9
Presentation boso TM-2450 - 10

24h Blood Pressure Monitor boso TM-2450 Function symbols on the measuring device AUTO/ START/STOP START/STOP AUTO/ START/STOP button AUTO/ AUTO button (day/night button) AUTO/ Automatic mode active Sleep mode active Battery status display: 1. Battery charged 2. Battery partially charged 3. Battery empty (no further measurement or data transfer possible) Storage full – 600 measures (no further measurements possible)

Open the catalog to page 10
Presentation boso TM-2450 - 11

24h Blood Pressure Monitor boso TM-2450 Tape Attaching the cuffs Place the cuff on the unclothed upper arm so that the white marking lies on the arteria brachialis. The cuff should lie roughly 2-3 cm above the elbow bend and should not be too tight. Two fingers should fit between the arm and cuff. Maximum one finger between the arm and XL cuff. Air connection plug Cuff connection socket Cuff connection socke

Open the catalog to page 11
Presentation boso TM-2450 - 12

24h Blood Pressure Monitor boso TM-2450 Start of the interval automation To start the automatic interval function, press and hold the black AUTO button with ” appears in the blood pressure monitor display and the display activated until “ is confirmed with a short signal tone (after approx. 5 seconds). If the display is off, activate it by pressing any button. If the device is operated in “Sleep button" mode, the patient must press the black " for the automatic system, AUTO button before going to sleep. Next to the " a " " appears in the display. After getting up, the black AUTO button must...

Open the catalog to page 12
Presentation boso TM-2450 - 13

24h Blood Pressure Monitor boso TM-2450 Performing a measurement Automatic adjustment of the pumping level (only in automatic interval mode) The boso TM-2450 automatically pumps up to the required pressure level. If this pumping level is not sufficient, the device automatically pumps approx. 60 mmHG above the original pumping level. Limiting the maximum pumping level The boso TM-2450 has the option to limit the pumping level. For the corresponding procedure, please refer to the boso profil-manager XD instruction manual. Performing a manual measurement In addition to the automatic...

Open the catalog to page 13
Presentation boso TM-2450 - 14

24h Blood Pressure Monitor boso TM-2450 To cancel the measurement, the white START/STOP button must be pressed on the boso TM-2450. If the measurement is to be taken at a later time a manual measurement can be taken using the START/STOP button at any time.

Open the catalog to page 14
Presentation boso TM-2450 - 15

24h Blood Pressure Monitor boso TM-2450 Ending the measurement and transferring the measured data As soon as the device is removed from the patient after the 24-hour measurement has been completed, the automatic function must be switched off. To do so, press and hold the black AUTO-button while the display is activated until the ‘ ’ symbol disappears in the blood pressure monitor’s display (approx. 5 seconds). If the display is off, activate it by pressing any button. After that, connect the TM-2450 to a computer with a PC-connection cable. Transfer the data according to the boso...

Open the catalog to page 15
Presentation boso TM-2450 - 16

24h Blood Pressure Monitor boso TM-2450 Insert charged batteries in the battery compartment We recommend that after each 24-hour measurement, the used battery set is changed and replaced using a newly charged battery set. Step 2 To prevent any data loss, the data stored on the boso TM-2450 are buffered using an internal battery. These batteries are automatically charged via the battery pack. With a fully charged battery pack, the data remain stored for approx. 10 days. Press the battery compartment lid down firmly and then slide it outwards. Remove empty batteries To fully charge the...

Open the catalog to page 16

All Boso catalogs and technical brochures

  1. boso medicus X

    18 Pages

Archived catalogs

  1. TM-2430 PC 2

    5 Pages

  2. Thermometers

    2 Pages

  3. Stethoscopes

    28 Pages