Catalog excerpts
THE RIGHT CHOICE FOR RONGEURS
Open the catalog to page 1CHOOSE VARIETY & PRECISION From Straight to Curved, Micro to Spurling, Stainless to Coated, having the proper Rongeurs is critical to positive surgical outcomes. That is why we offer the largest selection of Rongeurs on the market, all of them expertly manufactured in Germany using the highest quality materials and state-of-the-art craftsmanship. All BOSS Rongeurs are backed by our Lifetime Warranty* against defects in materials and workmanship, and you can count on the support of our sales and customer service team for quotations, cross-references, order tracking, and post-sales service....
Open the catalog to page 2PERFORMANCE COATINGS All of our Kerrison Rongeurs are crafted in high-quality, hardened, German stainless steel. However, to maintain a sharp edge and smooth action over frequent usage, BOSS Kerrison Rongeurs are available with two performance coatings, ensuring your Rongeur is at peak performance. Using an Aluminum Titanium Nitride (AlTin) coating bonded to the steel at high heat and pressure, Panther Rongeurs feature a low-glare black finish, smooth cutting action, and increased cutting edge hardness. Super-Coat utilizes the strength and lubricity of Titanium Nitride bonded to the...
Open the catalog to page 3T-bar ejector Shorter handle reach Smaller bite opening
Open the catalog to page 4MICRO KERRISONS small handle Length 7” | 175mm APEX MICRO KERRISONS small handle T-bar Ejector T-bar Ejector T-bar Ejector T-bar Ejector * Additional sizes may be available as made-to-order. Extended lead times required. For Kerrisons with extra performance coatings, please add the following to the end of the item number (e.g. 70-0200P / 70-0244SC).
Open the catalog to page 5T-bar ejector Shorter handle reach Larger bite opening
Open the catalog to page 6midsize handle APEX TARPON™ KERRISONS midsize handle T-bar Ejector T-bar Ejector T-bar Ejector * Additional sizes may be available as made-to-order. Extended lead times required. For Kerrisons with extra performance coatings, please add the following to the end of the item number (e.g. 70-0200P / 70-0244SC).
Open the catalog to page 7T-bar ejector Longer handle reach Larger bite opening
Open the catalog to page 8SPURLING KERRISONS large handle APEX SPURLING KERRISONS large handle T-bar Ejector * Additional sizes may be available as made-to-order. Extended lead times required. For Kerrisons with extra performance coatings, please add the following to the end of the item number (e.g. 70-0200P / 70-0244SC).
Open the catalog to page 9MICRO THIN FOOTPLATE small handle Made-to-order. Additional lead time may be required APEX MICRO THIN FOOTPLATE small handle T-bar Ejector T-bar Ejector For Kerrisons with extra performance coatings, please add the following to the end of the item number (e.g. 70-0200P / 70-0244SC).
Open the catalog to page 10streamlined hingeless design, delicate shaft curved up Length hinged design for extra strength, shaft available curved up, left and right Length Curved Left Curved Right For Kerrisons with extra performance coatings, please add the following to the end of the item number (e.g. 70-0200P / 70-0244SC).
Open the catalog to page 11ROTATING KERRISONS small handle (sold separately as 70-2390) Length BAYONET ROTATING KERRISONS small handle (sold separately as 70-2390) Length For Kerrisons with extra performance coatings, please add the following to the end of the item number (e.g. 70-0200P / 70-0244SC).
Open the catalog to page 12BAYONET MICRO small handle Length Shown with Panther™ coating BAYONET SPURLING large handle Length For Kerrisons with extra performance coatings, please add the following to the end of the item number (e.g. 70-0200P / 70-0244SC).
Open the catalog to page 13Shown with Panther™ coating
Open the catalog to page 14Straight w/Teeth Down w/Teeth Straight w/Teeth Straight w/Teeth Straight w/Teeth
Open the catalog to page 15DRAGON IVD RONGEURS Length • Available with Panther™ performance coating. Please add "P"to the end of the i
Open the catalog to page 16FERRIS-SMITH IVD RONGEURS Length NOTE: Any Ferris-Smith IVD Rongeur can be ordered With Teeth by adding “WT” to the item number ( e.g. 70-1575WT ) • Available with Panther™ performance coating. Please add "P"to the end of the item number (e.g.
Open the catalog to page 17BAYONET IVD RONGEUR Length 6 1/2” | 165mm • Only available with Panther™ performance coating.
Open the catalog to page 18BOSS INSTRUMENT ACCESSORIES Visit bossinstruments.com for the full range of BOSS Instrument accessories. Rongeur Cases KERRISON RONGEUR CASES All cases hold 8 Rongeurs 00-1220 - 10 x 12 x 6” (for up to 9” Rongeurs) 00-1230 - 10 x 16 x 6” (for up to 13” Rongeurs) FORAMINOTOMY RONGEUR CASE Extra height accommodates the curve of the foraminotomy Rongeur 00-1240 - 10 x 12 x 7.5” (extra height for curve) IVD RONGEUR CASE Holds up to 16 Rongeurs 00-1250 - 9 x 14 x 5” 00-1220 LIFETIME WARRANTY MATERIALS AND DESCRIPTIONS Unless otherwise stated, all instruments in this catalog are stainless steel....
Open the catalog to page 19104 Sommerfield Drive Gordonsville, VA 22942 USA Toll Free: 800-210-2677 Phone: 540-832-5000 Fax: 540-832-5515 Email: inquiry@bossinstruments.com bossinstruments.com ©2022 BOSS INSTRUMENTS, LTD. REV F L-34 BOSS AND BOSS INSTRUMENTS, LTD. ARE REGISTERED TRADEMARKS
Open the catalog to page 20All Boss Instruments catalogs and technical brochures
-
OB/GYN Instruments
4 Pages
-
PLASTIC SURGERY INSTRUMENTS
46 Pages
-
Single-Use Instruments
8 Pages
-
OPHTHALMIC SPECIALTY INSTRUMENTS
16 Pages
-
RETRACTOR SYSTEMS
11 Pages
-
T-Line Retractor System
2 Pages
-
Universal Arm System
2 Pages
-
WORKHORSE RETRACTOR SYSTEM
8 Pages
-
ANTEATER
2 Pages
-
Orthopedic Instruments
4 Pages
-
ENT Instruments
4 Pages
-
Plastic Surgery Instruments
4 Pages
-
LOBSTERTM RETRACTOR SYSTEM
8 Pages
-
LIGHTMAT
2 Pages