Series 400 - Sentinel Overhead Braced Fusion Partitions
1Pages

Restroom Partitions, Floor-Mounted with Overhead Brace Fusion Granite — Series 400 – SentinelTM This is the most popular style of partitions. It is attached to the floor and stabilized at the top of the pilaster with anti-grip headrail. Floor-mounted overhead-braced material is recommended for heavy traffic or vandalism-prone areas. It does not require any special floor or ceiling construction which makes it suitable for new or existing construction. Doors consist of two sheet metal faces insulated with a moisture-resistant honeycomb core that is adhered to the inner surface and set under pressure to cure. Manufactured from 300 Series stainless steel with a #4 satin brushed finish. Panels and pilasters are manufactured from natural granite. PermasealTM Edge Mills is the only manufacturer to offer the Permaseal Edge. Edges are formed to interlock together to provide a tight fit without crown molding. Corners are welded underneath a clip that is affixed to all corners. All panels and doors are fabricated using this technique. Panels Pre-drilled panels are 13⁄16" (3cm) thick, constructed from natural granite. Doors Doors are 1" thick, constructed from 22 gauge stainless steel. Each door includes internal 16 and 14 gauge welded reinforcements at the top and bottom hinge locations with a factory installed concealed true gravity cam. The closing position of each hinge is fully adjustable. A pre-punched hole permits field installation of the ADA-compliant concealed slide latch. Pilasters Pre-drilled pilasters are 13⁄16" (3cm) thick, constructed from natural granite. The floor edge of the pilaster shall be provided with 12 gauge mounting brackets (attached in the field with thru bolts provided) that will accept a 3⁄8" zinc-plated jack bolt for leveling. Hardware Mills standard hardware is constructed from stainless steel. Compartments are provided with all hardware and stainless steel fasteners to complete installation for applications with concrete floors and masonry block walls. Door Hardware Wraparound hinges are thru-bolted to the pilasters and the concealed slide latch includes an emergency egress feature. The slide latch does not require a twisting motion and complies with all Federal ADA guidelines. The strike/keeper is wraparound. Doors 32" wide or less are provided with a combination coat hook/bumper. Doors 34" wide or 36" wide are provided with an individual coat hook, door bumper and door pull. Theft-resistant fasteners are supplied with all hardware. Standard Selections Door ¨ 5WL ¨ Satin Granite Colors ¨ Golden Garnet ¨ Green Pine ¨ Pearl Luna ¨ Tropical Brown Optional Selections Hinges ¨ Stainless Steel Wraparound Gravity Hinge (STD) Door Hardware ¨ Stainless Steel Concealed Slide Latch and Keeper (STD) Brackets ¨ Continuous Stainless Steel Brackets (STD) Corners ¨ Welded Corners Brackets U-brackets and undrilled “L” brackets are provided with torx-head fasteners. Headrail Etched and anodized aluminum headrail is extruded with an anti-grip profile. It clamps over the pilaster and is secured at the wall with plastic brackets. Shoes Shoes are 4" high 300 Series stainless steel with #4 satin brushed finish and are secured by clear silicone caulk (provided by others). Verify all rough-in dimensions prior to installation. Consult local and national codes. Conformity and compliance to local and national codes is the responsibility of the installer. Page 1 of 1 6/19/2015 This information is subject to change without notice. Bradley_Partitions_FusionGranite_OverheadBraced