whiteSKY Alveo Line & Tissue Line Podložno Mistake and greškama subject ito izmenama change reserved bredent UK Ltd · Tapton bredent Park d.o.o. Innovation · Dubljanska Centre 25 · Brimington · RS 11000 Road Beograd · Chesterfi · T: +381 eld11 S41 2430 0TZ295 · T: (Mrs. +44 1246 Dr. Igda 559599 Markov) · www.bredent.co.uk · www.bredent.si/kontakt · @: enquiries@bred

whiteSKY T.L. surgical protocol Implant lengths Crestal drill Guided preparation Guided implant bed preparation is also possible with whiteSKY T.L. implants. The implant is then inserted freely by hand. Pilot drill Twist drill Surgical protocol Freehand

whiteSKY A.L. surgical protocol Implant lengths Crestal drill Partially guided preparation (2)Guided implant bed preparation is possible up to the final drill. • whiteSKY A.L. crestal drills are used freehand. • The implant is then also inserted freelhand. Please note the following when using ProGuide: • The crestal drills do not fit into the drill sleeves. Pilot drill Twist drill Surgical protocol Freehand

Surgical protocol Freehand storm, ZIRCONIA -jjf IMPLANT Immediate implantation - whiteSKY T.L. • Carefully remove the tooth root without damaging the vestibular bone lamella. • After extracting the tooth, thoroughly remove any granulation tissue and disinfect the cavity with Helbo aPDT. • The axial direction of the implant deviates from the axial direction of the alveolus. • The orientation can be changed, with the sharp tip of the pilot drill. • The twist drill is used to extend the new axis to its final depth. • The final drills expand the diameter of the cavity, depending on bone quality....

7 Immediate implantation – whiteSKY A.L. • The cavity is prepared in the same way with the pilot drill. • Next drill up to the final diameter using the twist drill and the final drills. • With the whiteSKY Alveo Line, the crestal tulip is prepared with whiteSKY crestal drills. • When inserting the implant, make sure that the conical crestal part is not touching the bone in order to avoid bone necrosis. Late implantation is possible with the whiteSKY Alve

Recall/follow-up Provisional restoration for immediate restoration: • Avoidance of laterotrusion contacts • No functional occlusal load • Always splint several implants together • If necessary, stabilise by resin splinting with neighbouring teeth using acid-etching technique • Do not pull the temporary denture over the implant shoulder Follow-up treatment: • Check with tap test using a metal probe after one week • If the splinting is lost, replace it • If there is a dull knocking sound, extend healing time or, if necessary, screw the implant in deeper

bredenttwhiteSKY Tissue Line • Only customise at the marked points • Use the red diamond bur (fine) for smoothing • Only with contra-angle handpiece (5:1) with cooling • Only customise at the marked points • Use the red diamond grinder (fine) for processing • Only with angled piece (5:1) with cooling • Analogues cannot be used after customisation • CAD library cannot be used

10 Questions from the selective market launch Can the whiteSKY A.L. be scanned? Yes, the whiteSKY implants are scanned directly, regardless of whether they have been customised or not. PLEASE NOTE: The library cannot be used with customised implants! In this case, the implants must be used like a natural tooth. Is an additional upgrade kit available for whiteSKY A.L.? Yes. This upgrade kit contains the whiteSKY insertion instruments and the crestal drills. If a customer wants to work with both whiteSKY implant lines, then the whiteSKY upgrade kit T.L + A.L. is required. Are special crestal drills...

Implants whiteSKY Tissue Line whiteSKY Alveo Line whiteSKY prosthetic parts Impression cap Laboratory analogue Prosthetic caps whiteSKY Alveo Line - crestal drill 3.5 Platform Ø 5

0091084GB-20240318 Mistake and subject to change reserved DENTAL INNOVATIONS bredent! bredent medical GmbH & Co. KG • Weissenhorner Str. 2 • 89250 Senden • Germany • T: +49 7309 872-440 • F: +49 7309 872-444 • www.bredent-medical.com • [email protected]