Catalog excerpts
Mobile Pump Stands 204 Mobile Infusion Stands 208 Clamping Infusion Stands 213 Wall Mounted Infusion Holders 213
Open the catalog to page 2Infusion & Pump Stands Mobile Pump Stands - Polyurethane, Easy Clean Features • Range of stands designed specifically to hold blood warmers, pumps & syringe drivers • Five leg base with low centre of gravity to assist stability • 32mm diameter 304 grade stainless steel upright & 25mm diameter pump support bows • Polyurethane overmoulded base with smooth edges & contours provides... • Water-resistant finish, allowing for easy & effective cleaning (including steam cleaning) • Shield for the castors • Impact protection to patients & staff, reducing the risk of skin abrasions & bruising •...
Open the catalog to page 3Infusion & Pump Stands Four U shaped hooks Height adjustable upright using a heavy duty handwheel PS/P/HC/4H (pumps not included) sales@bristolmaid.com
Open the catalog to page 4Infusion & Pump Stands Mobile Pump Stands - Mild Steel, Four Leg Features • Range of stands designed specifically to hold blood warmers, pumps & syringe drivers • Fully welded four leg base • 32mm diameter 304 grade stainless steel upright & 25mm diameter pump support bows • Height adjustable upright using a handwheel (1,270 - 2,000mm) • Four U-shaped hooks • Maximum recommended load... • Hooks - 12kg per stand plus • Fixed Upright/s - 22kg per stand • 75mm polypropylene / thermoplastic rubber twin-wheel castors (1 x anti-static) Dimensions (w x d x h) • Overall - 560 x 621 x 1,270 -...
Open the catalog to page 5Infusion & Pump Stands Four U shaped hooks Height adjustable upright using a heavy duty handwheel PS/P/HC/4H (pumps not included) sales@bristolmaid.com
Open the catalog to page 6Infusion & Pump Stands Features • Meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands • Five leg base with low centre of gravity to assist stability • 25mm diameter 304 grade stainless steel upright • Polyurethane overmoulded base with smooth edges & contours provides... • Water-resistant finish, allowing for easy & effective cleaning (including steam cleaning) • Shield for the castors • Impact protection to patients & staff, reducing the risk of skin abrasions & bruising • Protection to the fabric of the building • Coloured indicator caps provide department...
Open the catalog to page 7Infusion & Pump Stands
Open the catalog to page 8Infusion & Pump Stands Features • Meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands • Seamless welded 304 grade stainless steel construction • Height adjustable upright using a handwheel (1,270 - 2,000mm) • Available with two or four pigtail hooks • 9kg plastic coated weighted base available for additional stability • Maximum recommended load... • Hooks - 4kg per stand plus • Fixed Upright • Non-Weighted Base - 2kg per stand • Weighted Base - 4kg per stand • 50mm polypropylene / thermoplastic rubber twin wheel castors (1 x anti-static) Dimensions (w x d x h) •...
Open the catalog to page 9Mobile Infusion Stands - Mild Steel Features • Meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands • Welded mild steel construction • Height adjustable upright using a handwheel (1,270 - 2,000mm) • Available with two or four pigtail hooks • 9kg plastic coated weighted base available for additional stability • Maximum recommended load... • Hooks - 4kg per stand plus • Fixed Upright • Non-Weighted Base - 2kg per stand • Weighted Base - 4kg per stand • 50mm polypropylene / thermoplastic rubber twin wheel castors (1 x anti-static) Dimensions (w x d x h) • 650 x 650...
Open the catalog to page 10cr Features • Meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands • 304 grade stainless steel legs & upright with a plastic centre boss • Unique design allows for assembly using an Allen key to locate & hold the legs & upright in position • Supplied boxed for self-assembly • Height adjustable upright using a handwheel (1,270 - 2,000mm) • Available with two or four pigtail hooks • Maximum recommended load on hooks 4kg (attachment of blood warmers, pumps & syringe drivers is not recommended) • 50mm polypropylene twin-wheel castors (1 x anti-static) Infusion Poles...
Open the catalog to page 11Features • Clamp secures to 25mm vertical round tube (designed to fit our range of dressing trolleys) • When fitting to other trolleys, we strongly recommend that a risk assessment is carried out to assess stability • When fitted protrudes 45mm • Supplied with a two pigtail hook infusion pole • Maximum load on hooks 2kg Dimensions (w x d x h) • 55 x 220 x 1200mm Features • Wall mounted infusion bag holder • Available with one/two U shaped hooks • 25mm diameter “D” shaped tube to accept pumps (max load 10kg) • Maximum load per hook 2kg • Fixings not included Dimensions (w x d x h) • IV001 -...
Open the catalog to page 12All Bristol Maid Hospital Metalcraft catalogs and technical brochures
-
Mobile Computer Carts
11 Pages
-
Specialist and Technical Seating
10 Pages
-
2023 Bristol Maid Catalogue
452 Pages
-
Theatre Equipment
12 Pages
-
Sterile Services Equipment
8 Pages
-
Shelving and Racking Solutions
10 Pages
-
Sepsis Trolleys
8 Pages
-
Sackholders and Waste Bins
10 Pages
-
Resuscitation Trolleys and Carts
15 Pages
-
Procedure Trolleys Carts
18 Pages
-
Portering Chairs
8 Pages
-
Phlebotomy
8 Pages
-
Medical Records
14 Pages
-
Maternity Equipment
8 Pages
-
Linen Trolleys Bags
14 Pages
-
HTM71 Storage Solutions
16 Pages
-
General Purpose Trolleys
6 Pages
-
Drug and Medicine Storage
24 Pages
-
Drug and Medicine Dispensing
18 Pages
-
Dressing Instrument Trolleys
10 Pages
-
Dispensers Holders and Racks
8 Pages
-
Concealment Trolleys
4 Pages
-
Caretray Trolleys and Racks
42 Pages
-
Bariatric Equipment
10 Pages