SVG 2 and Probes The new Generation of Semiconductor Radiation Meters and Handheld Radiation Detection Probes Innovation with Integrity Defence CBRNE

General Specification Alarm thresholds for the dose rate and the accumulated dose are adjustable. The alarm is given either optically by a red flashlight and acoustically by a horn (> 90 dB A) or only by the flashlight. According to NATO NBC-4-NUC standards, the internal memory allows the storage of 330 data groups consisting of time, geographic location and current dose rate. 280 of them can be used for automatic storage after an adjustable time interval. Another 50 values can be recorded when required. Surface detection with αβγ–probe The SVG2 is a newly developed, handheld, hardened and micro-processor...

Newly Developed & Extremely Flexible Radiation Meter Typical applications & accessories Due to its unique design, the SVG2 is capable of performing any thinkable detection task in a nuclear contaminated terrain. The instrument is extremely flexible and can be used hand held, installed in vehicles or on board ships. The SVG2 can be connected via an RS 232 interface to a PC or central data station for data exchange or to a GPS receiver. The SVG2 with its mountings is military approved for vibration and shock. Accessory set: carrying bag and αβγ-probe with telescope Vehicle integration of the SVG2...

Shipboard Nuclear and Chemical Detection System As part of shipboard detection systems, it is possible to build up a special NC monitoring network consisting of SVG2, RAID-Ion Mobility instruments (please see our Bruker flyers for RAID instruments) and the NC monitoring software. Naval ship and submarine borne systems utilize a specially designed external γ-probe. The external γ-probe for naval environments was designed for use on submarines. However, the probe can be used for any kind of naval environment. The shipboard installation set includes a special vibration and shock mounting. External...

SVG2 Probe System Surface contamination probe CP170 The ergonomically designed surface contamination probe significantly expands the possibilities for radiation detection. It enables measurement of very low activities on surfaces. The detector is based on a high level of detector technology. α-, β-, and γ-contamination can be measured with a detection area of 170 cm2. Calibration factors for 11 nuclides allow accurate measurements of surface contamination in Bq/cm2. Highly sensitive γ-probe SP 45 The highly sensitive scintillation detector is specially designed for measurements of low level gamma...

Technical Specifications Basic unit External αβγ-probe Dimensions (LxWxH) Dimensions (LxWxH) Weight incl. batteries Measurement ranges Power supply α-, β-radiation ...350 kCps 0 (0...550 kBq/cm2) γ-radiation > 70 keV γ-dose rate 0.5 μGy/h...2 Gy/h 3x1.5 V battery (C-type) (>90 hours of operation) and/or via vehicle (10-32 V DC) Adjustable thresholds for optical and acoustic alarm EMP and TREE protected, water tight Ease of decontamination by complete immersion Measurement ranges γ-radiation γ-dose rate γ-dose Surface contamination probe CP 170 Detector type Zincsulfide coated plastic scintillator...