Bürkert Select
452Pages

Bürkert Select | EN We make ideas flow SOLENOID VALVES PROCESS ACTUATION PROCESS VALVES SENSORS

Bürkert Select | EN We make ideas flow

Order processing will be based on our current terms and conditions. The latest version can be found on our website and downloaded as a file. All the technical data presented in this catalogue is valid at the time of printing. As we are continuously improving and developing our products, we reserve the right to introduce modifications to the technical data at any time. As a consequence, we cannot accept legal liability for the information contained in this document, nor for any printing mistakes that may have occurred. The texts, photographs, technical drawings and any other form of...

Solenoid valves Ex solenoid valves Proportional valves and control Cable plug Time control from page 4 Pilot solenoid valves for pneumatic NAMUR solenoid valves Ex pilot valves Valve islands Seat valves and diaphragm valves Electrically and pneumatically operated ball valves Control valves with positioners Positioners and process controllers Actuators and position feedback from page 172 Sensors Transmitters and Controllers Mass Flow Meters (MFM) Micro dosing units

2/2 or 3/2-way Solenoid Valve for aggressive medium Pivoted armature valve with manual override Direct-acting with separating diaphragm Different circuit functions Suitable for aggressive medium Body material plastic Threaded connection vw Envelope Dimensions [mm] (see datasheet for details) Options • ATEX version • Optical or electrical position feedback Type 0121 is a high quality, direct-acting 2/2 or 3/2 pivoted armature solenoid valve that can be used in a wide range of applications for opening, closing, dosing, mixing and distribution. The separation between the magnetic system and...

Ordering Chart * With 1 m silicone cable 0121 Envelope Dimensions [mm] (see datasheet for details) Bottom view Body material D B E F

0131 2/2- or 3/2-way PVC Solenoid Valve for aggressive MediumsTrue union or G 3/8” - G 1/2” With hermetic isolation of fluid Insensitive to aggressive fluids Universal functions Lockable manual override as standard Simple installation and removal Jw Envelope Dimensions [mm] (see datasheet for details) Type 0131 is a direct-acting 2/2- or 3/2-way solenoid valve with different circuit functions. The actuator is isolated from the fluid by a double seal made of PTFE. No fluid contact with metallic components. Technical Data Orifice DN10-20 mm Body material PVC PVDF on request Coil...

Ordering Chart Circuit function

2/2-way Solenoid Valve for neutral mediaG 3/8”—G 3/4” Direct acting With hermetic isolation of fluid Lockable manual override as standard NC and NO circuit function Optional with electrical position feedback VW The direct-acting valve, Type 0131, is delivered with circuit function, normally closed or normally open . The solenoid actuator is separated from the medium by a double PTFE seal with a small ventilated space. The valve is used for shut-off, dosing, filling and ventilating medium where low pressures are applicable; also suitable for use in technical vacuum. Technical Data Body...

Ordering Chart Circuit function * Versions with 20 mm nominal diameter are not suitable for vacuum

Direct acting With hermetic isolation of fluid With lockable manual override Universal functions Electrical feedback optional vw The direct acting 3/2-way valve, Type 0131, is available in different circuit functions. The solenoid actuator is separated by a double seal of PTFE with a ventilated clearance from Medium. The valve is used for shut-off, dosing, filling, ventilating and distributing Medium with low pressures; also with technical Vacuum for DN10 mm. Technical Data Body material Brass Seal material NBR (EPDM or FKM on request) Medium Neutral fluids such as e.g. compressed...

Ordering Chart Circuit function Note: Versions with orifice 15 mm are not suitable for vacuum

Unique isolated technology for slightly contaminated fluids Rugged moulded diaphragm No metallic internal parts Pilot control with pivoted armature and lockable manual override This valve is specifically designed for aggressive fluids where a chemically compatible solution is required. The pilot operated solenoid valve needs to open and close a minimum differential pressure of 0.5 bar. Technical Data Pressure range 0.5-6 bar Max. Ambient temperature 0 °C to +40 °C (PVC), (0 °C to +55 °C, PVDF on request) Valve internal parts PVDF Body material PVC (PVDF on request) Seal material...

Ordering Chart Port connection

Plunger Operated 2/2-way Solenoid Valve for neutral media and high temperatures G 1/4” - G 1/2” • Fluid temperature to 180 ºC • Integrated metallic body seal • Wear resistant stainless steel seat High performance plunger operated, direct-acting solenoid valve with integrated metallic body seal and wear resistant stainless steel seat. Three way (Type 0355), high pressure (100 bar), and high temperature (250 °C) versions are also available. Technical Data Temperature media Ambient temperature Voltage tolerance Duty cycle Body material Brass with moulded stainless steel seat 1.4305 or...

Ordering Chart Port connection Orifice

2/2-way hard-coupled Solenoid Valve G 1/2” - G 2” • Switches without differential pressure • Operates on vacuum • Process proven rugged and reliable design One of the ever reliable workhorses of the Burkert solenoid range this hard-coupled solenoid valve with plunger piloted rugged diaphragm seal is perfect for vacuum, neutral gases and liquids. The high-performance design is available in brass and stainless steel with a range of diaphragm and seal materials. Technical Data Medium temperature 1 NBR -10 °C to +80 °C FKM 0 °C to +120 °C Duty cycle 100% continuous rating Body material...

Ordering Chart Port connection 1 The coil for UC power supply is provided with an integrated high power electronic. Please check sufficient power supply 2) The valve is provided with a cable plug with integrated rectifier