Direct-acting plunger solenoid valves
16Pages

894393 | Version 08/2015 | Print 08/2015 | Bürkert Corporate Communications Direct-acting plunger solenoid valves D.EV series 6011, 6012, 6013, 6014 Bürkert Fluid Control Systems Christian-Bürkert-Straße 13 –17 74653 Ingelfingen Germany Tel.: +49 (0) 7940/10-0 Fax: +49 (0) 7940/10-91 204 info@burkert.com www.burker

Direct-acting plunger solenoid valves of the D.EV series The direct-acting plunger valves of the D.EV series are designed for operation in machine construction, instrument engineering and pneumatics. The robust construction and compact design allow use even under harsh climatic and mechanical conditions. The fully welded body concept with a plunger guide tube and stopper provide for a highly leak-proof system. The D.EV series comprises four plunger valve types. First, there are the 2/2-way valves 6011 and 6013. They differ essentially in their diameter and coil power. The valve types 6012...

Overview of versions and properties 6011 The following versions are available: Switching pressure: 0 ... 21 bar Media temperatures: -30 ... +100 °C Seal material: FKM Diameters: DN 1.2.4 mm Body materials: Brass, polyamide (PA), stainless steel 1.4105 Process connections: M5, G 1/8, flange Max. Kv value: 0.13 m3/h Normally closed (NC) Standard versions optimized for the application are also available, which makes it easier to choose the right valve. The following table gives an overview of the available options, certifications and certificates. 6013 The following versions are...

Fully welded core guide tube – for additional reliability In all valves of the D.EV series the stopper and core guide tube are welded together for a gas-tight construction. This makes the system more leak-proof, especially in the case of critical media. In steam applications, the requirements for the seat seals are especially stringent, since they are exposed to extreme mechanical loads from the effects of pressure and temperature. Especially material combinations of FKM and PTFE ensure reliable switching behaviour. Variable threaded connection technology Hose connections The brass version...

Energy-saving pulse version For saving electrical energy, pulse versions are the right solution. A short current pulse is sufficient to open or close the valve. A permanent magnet keeps the valve open following the starting pulse. Therefore, no energy is needed and the valve does not heat up. The valves are designed with two-wire technology and are also ­ vailable a on request with switching electronics (pole reversal) in the connector plug (see accessories). The Ex versions of the 6013 valve with the coil system (AC10) are suitable for use in areas with explosive gas-air mixtures and...

The 6011 product spectrum at a glance Standard version, normally closed (NC) Sealing material FKM, form C for connector socket type 2506 or: form B for connector socket type 2507 available x = available in standard version Photo at right: Gas control in surface finishing systems 10 Direct-acting plunger solenoid valves Direct-acting plunger solenoid valves

Functioning principle NC Pulse version, seal material FKM, epoxy coil, media temperature -10 . .. + 120 °C DVGW version EN 161 NC, brass body, seal material NBR Direct-acting plunger solenoid valves Direct-acting plunger solenoid valves

Lab and medical technology In lab and medical technology the requirements placed on the media-contacting parts of the valves are especially high. Contaminations due to the material used and the production or assembly processes must be avoided in any case. The valve 6013 fulfils these requirements especially well. All media-­ contacting parts are made of high-quality stainless steel. After completion of production the valve is c ­ leaned in a special cleaning process, in which all residue is completely removed. Plasma systems Plasma systems are used primarily for surface finishing. Plasma is...

Overview of versions and properties 6012 Standard versions optimized for the application are also available, which makes it easier to choose the right valve. The following table gives an overview of the available options, certifications and certificates. The following versions are available: Switching pressure: 0 ...10 bar Media temperatures: -30 °C .. + 100 °C Sealing materials: FKM, EPDM Diameters: DN 1.2.1.6 mm Body materials: Brass, stainless steel 1.4105, polyamide (PA) Process connections: M5, G 1/8, flange, push-in hose connection (P) Max. Kv value: 0.06 m3/h Normally Open (NO),...

Standard version In the standard version the fluid element is made of brass and is suitable for the control of neutral liquids and gases. For non-ferrous metal applications or aggressive media, versions are available in stainless steel or plastic. The banjo versions especially suitable for pilot control. For easier mounting on the main valve or for row mounting on a mounting plate the banjo valve 6014 is equipped with a connecting block. The pilot valve is delivered with service-friendly manual actuation as a standard feature. Service-friendly manual operation 6014 For easier commissioning,...

Functioning principle C Sealing material FKM, form C for connector socket type 2506 or: form B for connector socket type 2507 available Pneumatic version, functioning principle C, Sealing material NBR, manual actuation standard, form C for connector socket type 2506 or form B for connector socket type 2507 available Direct-acting plunger solenoid valves Direct-acting plunger solenoid valves

Polyamide body material, functioning principle C (NC) Line connection Functioning principle NC Pulse version, seal material FKM, epoxy coil, media temperature -10 ... +120 °C For flange connection: Coils with different power outputs 1) Ex mb II T4, seal material FKM, moulded cable, -30 ...+40 °C with manual actuation 2) Ex mb II T4, seal material FKM, moulded cable, for single mounting only, -30 .+60 °C, without/with manual actuation Remark: a) Ex ia IIC T6 on request b) Pressure ranges may vary Direct-acting plunger solenoid valves Direct-acting plunger solenoid valves