*mymedicalexpo

DS0117

Product catalog summary

Overview: The document provides technical specifications and ordering information for the Type 117 2/2-way mini solenoid valve by Bürkert. This valve is a normally-closed, direct-acting plunger-type solenoid valve with a PTFE-coated diaphragm that isolates the fluid from the solenoid system.

Specifications:

Design: Compact with low electrical power consumption and short response times.
Materials: Body made of ETFE (TEFZEL), seal material options include PTFE with EPDM or FKM.
Media Compatibility: PTFE/EPDM for alkalis, acids, washing, and bleaching lyes; PTFE/FKM for oxidizing acids, salt solutions, oils, and waste gases.
Temperature Range: Medium temperature from -10 to +70 °C, max ambient temperature of +55 °C.
Viscosity: Maximum of 21 mm²/s.
Response Times: Approximately 20 ms for both opening and closing.
Installation: Flexible, but preferably with solenoid system upright.
Operating Voltages: 12 V DC, 24 V DC, 220-230 V UC, with a voltage tolerance of ±10%.
Power Consumption: 4 W, with a 100% duty cycle and cycling rate up to 300 c.p.m.
Protection Class: IP 65 with cable plug.

Ordering Information:

Valves are available with ETFE bodies and PTFE-seat seals with EPDM or FKM.
Various configurations are available based on orifice size, port connection, Kv value, pressure range, seal material, and voltage/frequency.
Accessory options include standard cable plugs and versions with LED indicators.

Additional Notes:

For special application conditions, consultation is advised.
Subject to alterations by Christian Bürkert GmbH & Co. KG.

Catalog excerpts

Biirkert FLUID CONTROL SYSTEMS 2/2-way-mini Solenoid Valve ■ Compact design ■ Low electrical power consumption ■ Short response times ■ Hermetically sealing isolating diaphragm • Non-metallic valve internals DTS 1000010903 EN Version: D Status: RL (released | freigegeben | valide) printed: 22.09.2017 Type 117 is a normally-closed direct-acting plunger-type solenoid valve with PTFE-coated diaphragm. The diaphragm isolates the fluid from the solenoid system. When deenergized (in circuit function A) the valve is closed by spring action. When energized, the solenoid armature is drawn in 2/2-Way, G 1/8, UNF 1/4-28 Fluid Control Systems against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil. Circuit function A A A 2/2-way valve NC p Technical data

Open the catalog to page 1

DTS 1000010903 EN Version: D Status: RL (released | freigegeben | valide) printed: 22.09.2017 MaterialsOrdering chart for valves (other versions on request) All valves with ETFE-body (TEFZEL); without cable plug (see accessory); PTFE-seat seal with EPDM or FKM Circuit function

Open the catalog to page 2

DTS 1000010903 EN Version: D Status: RL (released | freigegeben | valide) printed: 22.09.2017 0117 burkertOrdering chart Accessory (Cable plug acc. to DIN EN 175301-803 Form B (previously DIN 43650) 9 The delivery of a cable plug includes the flat seal and the fixing screw. For other cable plug versions acc. to DIN EN 175301803 Form B (previously DIN 43650), see data-sheet Type 2507. To find your nearest Burkert facility, click on the orange box -> In case of special application conditions, Subject to alterations please consult for advice. © Christian Burkert GmbH & Co. KG 10°1/1_EU-en_00891600...

Open the catalog to page 3