Air Blow Box Type 6014 - 1 Pages

Add to MyMedicalExpo favorites
Air Blow Box Type 6014

Catalog excerpts

The Air Blow Box 6014 is used for the fast labeling of products in motion or fixed. Labels can be applied from the side, top or bottom. Labels are blown on the product via airflow over a wide distance and without any mechanical contact. Technical data Transfer method Label width mm Installation position Product fixed Distance peel-off plate to product mm Cycle time about cycles/min. smaller labels under 50 mm only need to be tested before depending on the label size 3) at H = 150 mm without back-feed and 250 mm/s print speed. Higher cycle rate possible for smaller labels. 1) All specifications about delivery, design and technical data are given to the best of our current knowledge and are subject to change without prior notice. For more information please refer to www.cab.de cab-Produkttechnik GmbH & Co KG Wilhelm-Schickard-Str. 14 76131 Karlsruhe / Germany www.cab.de info@cab.de

 Open the catalog to page 1

All Cab Produkttechnik catalogs and technical brochures

  1. MACH1/MACH2

    4 Pages

  2. MACH4

    13 Pages

  3. Ribbons

    7 Pages

  4. cablabel S3

    12 Pages

  5. Label Marker EN

    4 Pages

  6. Cablabel R2+

    2 Pages

  7. PX Print module

    13 Pages

  8. Hermes+

    20 Pages

  9. EOS1 and EOS4

    12 Pages

Archived catalogs