BP 100/300/500/800

Product catalog summary

Overview
BP 100/300/500/800 are single-stage medium pressure regulators with a diaphragm and balanced valve, designed for use in medical gas pipeline systems. They are suitable for second-stage regulation or terminal unit installation (BP100). The balanced valve design minimizes sensitivity to inlet pressure variations, allowing for high flow rates.

Specifications

Weight: BP100 - 0.8 kg, BP300 - 1.1 kg, BP500/800 - 2.5 kg
Maximum inlet pressure: 50 bar
Standard discharge (Q1) and nominal outlet pressure (P2) vary by model and inlet pressure, as detailed in the accompanying table.

Standard Configuration

Inlet/Outlet sizes: BP100 - G 1/4" F, BP300 - G 1/2" F, BP500 - G 3/4" F, BP800 - G 1" F
Includes inlet filter and LP gauge
Rear mounting option for BP100 and BP300

Materials

Construction: Chrome-plated brass
Diaphragm: NBR
Valve seat, filter, and seals are gas-specific

Special Regulators

BP100: Inlet notched connection, outlet terminal unit, P1: 14 bar
BP300: For T2m50 change-over unit or CENTREOLE outlet installation, P1: 20 bar

Options

Threaded cover neck for panel mounting
Rear mounting gauge

Maintenance
A maintenance kit is available for qualified personnel. Maintenance can be performed on-site, at the manufacturer's plant, or at an authorized service shop.

Ordering Information
When ordering, specify the detailed reference, gas type or mixture, and maximum outlet pressure. Example: BP300 - oxygen - 4 bar.

Note
All specifications are subject to change without notice. CAHOUET reserves the right to modify products as needed.

Catalog excerpts

BP 100/300/500/800 DETENDEURS MOYENNE PRESSION MEDIUM PRESSURE REGULATORS Ces détendeurs simple étage, avec détente à membrane et clapet équilibré, sont prévus pour montage sur réseau. Ces détendeurs sont conçus pour la régulation en deuxième détente d’un réseau de gaz médicaux ou pour être montés sur une prise médicale (BP100). Grâce à leur clapet équilibré, ils sont peu sensibles aux variations de pression amont et autorisent des débits importants. These single stage diaphragm regulators with balanced valve are designed to be fitted on a pipeline system. These regulators are designed to be used as a second stage regulator for medical gas pipeline system or to be fitted on to a terminal unit (BP100). Thanks to their balanced valve, they do not react to inlet pressure variations and enable high flow rates. Poids : BP100 : 0,8 kg BP300 : 1,1 kg BP500/800 : 2,5 kg Pression amont maximum : 50 bar Q1 : débit type P2 : pression nominale de détente Voir tableau ci-dessous Weight: BP100: 0,8 kg BP300: 1,1 kg BP500/800: 2,5 kg Maximum inlet pressure: 50 bar Q1: standard discharge P2: nominal outlet pressure See table below Ex : pour un BP100 avec une pression d’alimentation de 10 bar et un débit variant de 0 à 85 Nm3/h, P2 varie de 5,2 à 4 bar. Ex: for a BP100 when the inlet pressure is 10 bar and the flow varies from 0 to 85 Nm3/h then P2 varies from 5,2 to 4 bar. PRESSION D'ALIMENTATION INLET PRESSURE Chute de 30% de la pression P2 30% P2 pressure drop BP100 Chute de 10% de la pression P2 10% P2 pressure drop

Open the catalog to page 1

STANDARD ARRANGEMENT Entrée / Sortie BP100 G 1/4" F BP300 G 1/2" F BP500 G 3/4" F BP800 G 1" F - Filtre d'entrée - 1 manomètre BP - Fixation arrière possible pour les BP100 et BP300 Inlet / Outlet BP100 G 1/4" F BP300 G 1/2" F BP500 G 3/4" F BP800 G 1" F - Inlet filter - 1 LP gauge - Rear mounting possibility for BP100 and BP300 Construction : laiton chromé Membrane : NBR Garniture de clapet, filtre et joints selon gaz Material: chrome plated brass Diaphragm: NBR Valve seat, filter and seals according to gas DETENDEURS SPECIAUX SPECIAL REGULATORS - BP100 : Entrée raccord à cran Sortie prise médicale...

Open the catalog to page 2

BP 100/300/500/800

BP 100/300/500/800

Catalog excerpts

All CAHOUET S.A. catalogs and technical brochures