Housings & Frames CamHosp CamHosp 2 Advantages • New modular design immediate and lasting joint • More secure assembly As part of our program for continuous improvement, Camfil reserves the right to change specifications without notice. 2013-10-08 Type: Modular filtration ceiling with a unidirectional flow for operating theatres Design Construction: Modular, with each module assembled and sealed in the factory and consisting of: 1 plenum part made of mild steel 1 airtight, continuously welded platform with a thickness of 2 mm 1 fastening kit Assembly: The modules are simply bolted together on site. Airtight joints are created mechanically between the modules Protection: Oven-baked, RAL 9010 epoxy coating both inside and out Test connector: 1 test connector accessible from the operating theatre to measure the loss of pressure and to take Test Aerosol samples Fitting the filters: From the operating theatre the filters can be quickly clamped in place with a compression limiter using captive, pre-positioned tabs Casing airtight at 450 Pa: Class B of EN 1886:1998, Class L1 (M) of PR EN 1886:2003, Class C of PR EN 12237:2003 Joints airtight at 450 Pa: Maximum local penetration < 10-4 (0.01%) in accordance with ISO EN 14644-3 Surgical lighting: Airtight Finish: 3 types of finish: - Screentek: set of clip-on frame units with removable screens made of monofilament polyester fabric - Protek: set of clip-on frame units with the frame and grill welded and with a white, RAL 9010 epoxy coating - Teknik: set of clip-on frame units with a white, RAL 9010 epoxy coating Options: Rigid air flow guides