CamVane 100 Advantages • Air velocities between 1,0 to 100 % rain • Minimal risk of freezing Application: Intake grille which is a very efficient for rainprotection. It is used in all filter installations where the water, rain and moisture problems occur, such as in marine environments, coastal areas, the rivers and inland. Type: CamVane has specially-shaped aluminium profiles which generate turbulence in the airflow. Frame: Aluminium EN-AW-5754 Profiles: Aluminium EN-AW-6060 Air velocities: 1.0 - 5.0 m/s in the duct system Size: Supplied with any dimensions up to 2500 x 2500 mm Deep: Standard 100 mm Drainage: Supplied with drain at the bottom. Mounting: Mounting flange or fastening ears to customer specifications. • Weather resistant material 5,0 m/s • Low noise level • Very low pressure drop Optional extras: As part of our program for continuous improvement, Camfil reserves the right to change specifications without notice. 2016-02-02 • Protective grating for CamVane 100 is delivered afterwards • Installation flanges on the front or rear of the CamVane Order example x CamVane 100 (w x h) 600 x 600 mm x Protective grating (W x h) 600 x 600 mm Approx. 35 Efficiency of droplet separator Tested by VTT in Finland to EN 13030:2001. Determining the sound power level, pressure and flow from one out grilles to ISO 5135 (SP Report P906282 rev).