• Complete interchangeable diffusion • plates range • Long lasting reliability and tightness: • robust fully welded construction ADVANTAGES Tool-less filter clamping 100% secured and immediate Quick grid locking for immediate access to filter • Option with damper Application Turbulent airflow in clean rooms Construction: Steel, fully welded seams Finish: White epoxy coated RAL 9010 (SW) Available in material SS 304 (S4) and SS 316L (S6) Filters and air diffusers must be ordered separately: Filters: MEGALAM MD/MX/MD.PU gasket frame height (66/90/110mm) Air diffusers: Comment Swirl-(SW), Perforated- (PF) Adjustable - (AV) and Four way diffuser (4W) For more information about filters and air diffusers, see the relevant product pages Gasket type options : DIN and GEL Control equipment: Room side accessible pressure drop port Option: with damper The CleanSeal is a reliable and versatile filter housing especially developed for hospitals, clean rooms and Life Science facilities. This terminal housing equipped with CamfiTs premium HEPA filters makes an ideal solution to achieve the high demands on air cleanliness by minimizing the number of particles and microorganisms in the air. Cleanseal is available in several standard sizes and different types of connections/configurations. The filter clamping system is adjustable for different filter depths. This scalability allows an upgrade of existing filter to a deeper filter with lower pressure drop. Low pressure drop filters can be used either to maintain pressure cascades or to get energy savings. Thanks to the tool-less filter clamping and unique filter retainer, the handling and maintenance if very easy. The filter is pre-positioned in the housing which makes it possible to handle by only one person. The installation of the housing is very easy with supporting blocks. The hinged diffusor plate gives direct access to the filter and control ports and is opened with just a badge/card. Consult Camfil office for additional information. Filter size HxWxD (mm) Con. 0 (mm) The item types in the table are PU versions (for filters with PU gasket). Other sizes and variants on request. For ordering: To select filter frame height replace "xx" with "MD" for Megalam MD, "MX" for Megalam MX and "MG" for Megalam MG *Entry Position (xx) : 00 - All Square, LS - Long Side and SS - Short Side SW= Standard version steel white RAL 9010 (Optional S4=Stainless steel SS 304, S6= SS 316L) P= PU version (G= GEL version, D= DIN version) www.camfil.com As part of our program for continuous improvement, Camfil reserves the right to change specifications without notice. 2020-08-04