Opakfil ES Advantages • Long operating life optimised for LCC • Aerodynamic radial design Application: Air conditioning applications and preparatory filtration in clean rooms. Type: High efficiency, incinerable filter. Frame: 25mm thick flange, polypropylene and ABS. Media: Glass fiber paper. Separator: Hot-melt beads. Sealant: Polyurethane. EN779:2012 efficiency: M6, F7, F8, F9. Recommended final pressure drop: 450 Pa (suggested economical change point 350 Pa). Temperature: 70ºC maximum in continuous service. Mounting system: Front and side access housing and frames are available, Type 8, Type L and FC housings. • Certified performance • Very low Energy Consumption • Less frequent changes ENERGY EFFICIENCY CHECK ENERGY CLASS ON As part of our program for continuous improvement, Camfil reserves the right to change specifications without notice. 2015-10-23 EFFICIENCY GUARANTEE Model Name Filter class Pressure drop Energy consumption kWh/y** Energy class*** * ME%: Minimum efficiency ref. to EN779:2012 ** Energy Consumption, kWh/year: Calculated according to Eurovent Guideline 4/21-2014 *** Energy class: according to Eurovent RS 4/C/001-2015