Pharmaseal-E: full equipment with individual isolation damper Advantages • Combines all the essential fuctions required for pharmaceutical and biotechnology facilities • Integrated Control panel : all controls and connections accessible from room side • Easy maintenance : quick filter change • Long term reliability : fully welded seams movable damper • Traceability : unique serial number • Individual tightness test at factory • Individual isolation damper integrated, with command from roomside Application: Turbulent airflow clean rooms in bio-pharma Type: Terminal filter ducted ceiling housing for HEPA/ULPA filters in clean rooms, gel seal or expanded PU gasket, with individual isolation damper equipped for GMP tests Construction: Galvanised steel 1.5mm, fully welded seams, white epoxy paint, oven baked Connection: By ribbed circular inlet continuous welded on side Damper: Individual adjustable isolation damper, for isolating the housing from ductwork and for airflow adjustment accessible from room side -Included functions accessible from room side: - Static pressure port - Damper control with damper position indicator - Aerosol dispersion system with aerosol port injection For filters: High airflow MEGALAM MG HFU HD (gel seal) or HFP HD (PU gasket) to be ordered separately Filter Mounting: Quick filter change using pivoting clamps fitted with compression limiter Filter seal: Knife edge for immediate air tightness with gel or PU gasket Control : Individually leak tested at 750 Pa by pressure decay according to NF M 62200 Installation : By removable "universal blocks", suspended by hangers or integrated into clean room ceiling panels Hinged grids : Perforated, swirl, 4 ways to be ordered separately CREO APPROVED As part of our program for continuous improvement, Camfil reserves the right to change specifications without notice. 2013-10-20 Pharmaseal-E full Pharmaseal-E full Pharmaseal-E full Pharmaseal-E full Pharmaseal-E full Pharmaseal-E full SIDE ENTRY * Weight without filter ** Overall, including Ø 60mm