Pharmaseal Advantages • Combines all the essential CREO APPROVED As part of our program for continuous improvement, Camfil reserves the right to change specifications without notice. 2013-10-08 • Quick filter change functions required for pharmaceutical and biotechnology facilities • Controls and connections accessible from room side • Fully welded seams • Capability to isolate the room during filter change Application: Turbulent airflow clean rooms in pharmaceutical and bio-pharma. Type: Terminal filter ducted ceiling exhaust housing for HEPA/ULPA filters in clean rooms, gel seal, with individual bubble tight damper. Construction: 1.6mm aluminium, continuously welded. Duct connection: Round, fully welded ribbed inlet on top 305 diameter. Damper: Individual adjustable bubble tight damper for airflow adjustment and hood bubble tight isolation. Included functions: Static pressure port. Damper control with damper position indicator. Overall efficiency test: downstream sample port. Ports: Chrome-plates brass quick disconnect. For filters: MEGALAM HFU H14 or U15 gel seal MD, MX and MG depth. Filter seal: Immediate airtight seal by knife edge technology and gel seal filters. Filter mounting: Quick filter change by pre-positioned rotating clamps. Controls: Individual MPPS scanning, EN 1822 individual test report in the box. Fastening: Suspended or fixed by 4 hanging pads. Grille: Stainless steel 304 flush perforated hinged grille, 40% open with 38mm removable trim. With complete control set: static pressure port, damper control, overall efficiency port. PHARMASEAL 6P6