Termikfil 2000 Advantages • Meets FDA requirements • Exclusive precuring process • Maximum continuous at 300ºC carried out in the plant • Efficiency tested after precuring operating temperature 350ºC, efficiency 99,99% at 0,3 µm • Ceramic frame Application: Protection of ultra-clean processes at high temperature, sterilisation tunnels in the pharmaceutical industry. Type: Very high efficiency panel resistant to 350ºC in continuous service. Frame: Composite ceramic. Gasket: Rolled glass fibre paper + 6mm dia glass braid. Media: Glass fibre. Separator: Glass strands. Sealant: Ceramic. Faceguard: Upstream and downstream in stainless steel. DOP efficiency: ≥ 99.99%. Maximum local penetration: 0.01% conforming to FDA requirements. Recommended final pressure drop: 350 Pa. Temperature: Up to 350ºC in continous service. Test: 100% after thermal treatment at 300ºC. Mounting: A stainless steel adabtor frame can be supplied to reach the thickness of 150mm or 292mm. NB: To reduce fume emission when starting up, TERMIKFIL undergoes a specific precuring cycle in the factory at 300ºC using an exclusive CAMFIL process. As part of our program for continuous improvement, Camfil reserves the right to change specifications without notice. 2016-02-02 Model Name