SERIES DB DENTAL MULTICHANNEL MANIFOLD

SERIES DB MODULAR DESIGN ASSEMBLY ACETAL RESIN USED FOR MANIFOLD AND VALVE BODY IS APPROVED BY THE WRAS/KTW AND FDA/NFS STANDARDS EASY MODULAR ASSEMBLY SYSTEM MULTIPLE COMBINATION OPTIONS FOR FULL CUSTOMISATION ONLY STAINLESS STEEL PARTS CONTACT THE FLUIDS* The Series DB is a modular and compact solution, Each single manifold is configurable in several ways optimising pneumatic, hydraulic and electrical to match the operating requirements of each connections — reducing installation times on machines handpiece installed on the dental units. operating in the industrial and life sciences sectors....

Series DB / Dental multichannel Manifold Series DB / Dental multichannel Manifold Manifold configuration for the connection of ultrasonic scalers Manifold configuration for the connection of Manifold configuration for the connection of Easy to install Modular i | |

Designed to be flexible Modularity Plugs for valve positions The manifolds can be quickly and simply assembled “Closed version” plug “Open version”

Series DB / Dental multichannel Manifold Integrated flow regulators SHORT LONG Fixing holes N° 2 blind holes for screws Ø3 mm for plastic - “Short” flow regulator for factory settings. Normally used for the regulation of the Air Drive. - “Long” flow regulators accessible to the dentist. Normally used for the regulation of Air and Water Spray. Connections for external flow regulators Hose barb fittings in 303 stainless steel material suitable for I.D. tubing Ø 1.6 mm Flow direction The standard direction of flow is from the lateral port to the frontal ports. It is possible to configure the manifold...

General data TECHNICAL FEATURES Valve function direct acting poppet type Pneumatic connection hose barb fittings for I.D. tubing Øi 1.6 - 3 - 4 mm / M5 threaded Valve orifice diameter Flow coefficient kv (l/min) Nominal flow (air @ 6 bar free flow) Operating pressure Operating temperature filtered air class 5.4.4 according to ISO 8573-1, inert gas, potable water filtered air class 5.4.4 according to ISO 8573-1, inert gas MATERIAL IN CONTACT WITH THE MEDIUM Manifold and valve body Valve internal parts IXEF - stainless steel 303 - 430 brass - stainless steel 303 - 430 ELECTRICAL FEATURES Voltage...

Series DB / Dental multichannel Manifold AT = terminal fittings (supplied with 1 fixing plate and 3 O-rings) AJ = joint fittings (supplied with 2 fixing plates and 6 O-rings) 2 = hose barb fitting for tubing 0 1.6 x 3.17 mm 3 = hose barb fitting for tubing 0 3 x 5 mm 2 = hose barb fitting for tubing 0 1.6 x 3.17 mm 3 = hose barb fitting for tubing 0 3 x 5 mm 2 = hose barb fitting for tubing 0 1.6 x 3.17 mm 3 = hose barb fitting for tubing 0 3 x 5 mm AL = angled element (supplied with 3 joint fittings, 2 fixing plates and 6 O-rings) 4 = hose barb fitting for tubing 0 4 x 6 mm 5 = threaded M5 female...

Camozzi Automation S.p.A. Società Unipersonale Via Eritrea, 20/I 25126 Brescia Italy Tel. +39 030 37921 [email protected] Customer Service Tel. +39 030 3792790 [email protected] Export Department Tel. +39 030 3792262 [email protected] A Camozzi Group Company