Catalog excerpts
Washing Buffer 10x Wash Buffer for immunoassays Available products: Washing Buffer PBS 10x Washing Buffer PBS 10x without Tween Washing Buffer TRIS 10x Washing Buffer TRIS 10x without Tween (article no. 140) (article no. 141) (article no. 145) (article no. 146) 2 – 8 °C or -15 to -30 °C (tolerates repeated freezing and thawing cycles) contains < 0.0014 % [w/w] reaction mass of CMIT/MIT (3:1) Expiry date when stored unopened: see label on the bottle Use working solution immediately! For general laboratory use Instructions for use Salt crystals may precipitate due to storage at 2 - 8 °C or freezing. Therefore, to prepare the working solution, the Washing Buffer must be warmed to room temperature beforehand, which will dissolve any salts that may have precipitated. The buffer should be thoroughly mixed again by shaking immediately before use. The working solution is prepared from the stock solution by diluting 1:10 with distilled or demineralized water and should be used on the same day. Washing Buffer can be used in automated washers depending on the salt tolerance of the washer. It is essential to observe the specifications of the respective manufacturer! Suitability of Washing Buffer for a specific assay has to be tested by the user. For further information please visit www.candor-bioscience.com.
Open the catalog to page 1All CANDOR Bioscience catalogs and technical brochures
-
SafetyTector® S
1 Pages
-
Stripping Buffer
1 Pages
-
Coating Buffer 10x
1 Pages
-
PlateBlock™
1 Pages
-
BSA-Block
1 Pages
-
SmartBlock™
2 Pages
-
ReadyTector
4 Pages
-
BUFFERS AND SOLUTIONS
20 Pages
-
The ELISA Experts
8 Pages
-
AP-Protector®
1 Pages
-
HRP-Protector™
1 Pages
-
Antibody Stabilizer
1 Pages
-
Liquid Plate Sealer®
2 Pages
-
LowCross® HRP-Stab
1 Pages
-
Assay Defender®
2 Pages
-
Sample Buffer
1 Pages
-
Blocker selection
3 Pages
-
LowCross® HRP-Stab
1 Pages
-
LowCross-Buffer®
2 Pages