Artikulator CA 3.0
8Pages

natural prosthetics with three-dimensional movement.

CA 3.0 – THREE-DIMENSIONAL MOVEMENT LEADS TO SUCCESS. The demand for creating highly esthetic restoration every day also requires optimal adaptation in the patient‘s mouth. The CA 3.0 articulation system by Candulor excels through simplicity. It only combines as many functions as are necessary. The movements of human nature were duplicated here and make esthetic restoration functionally safe. The special aspect of the CA 3.0 is the double cone shape of the guided joint section. This allows simulating natural three-dimensional movement at the work place. This way the restoration of the...

EXCEPTIONALLY EASY FOR EVERY PATIENT SITUATION. INCISAL POINT INDICATOR The positioning and orientation aid with overlying guide groove for exact insertion of the rubber band at the occlusion level. SPLIT-CAST-SYSTEM Integrated magnet in the base for a clean and corrosion-free split cast surface. Simple placement and xation of the models.

SIMULATE MOVEMENT PATTERNS IN A NATURAL ENVIRONMENT. The articulation system CA 3.0 was designed along the CAMPER plane. This runs parallel to the occlusal plane, thus giving very good reference. CAMPER PLANE OCCLUSAL PLANE THE TEMPOROMANDIBULAR JOINT – AN OVERVIEW The temporomandibular joint is both a rotating and sliding joint with two types of movement: The rotation or hinged axis as well as the translational or sliding movement. The most common form of movement is a combination of both types of movement. A rotation with simultaneous translation – rotary sliding. Interaction between the...

HORIZONTALSAGITTAL JOINT AXIS HORIZONTALTRANSVERSAL JOINT AXIS VERTICAL JOINT AXIS THE CA 3.0 JOINT REPLICATES THE NATURAL TEMPOROMANDIBULAR JOINT OUTER CONE 13° INNER CONE 17° The double cone simulates the shape of the joint head to avoid straight line movement in case of lateral and transversal movement and thus enables complying with physiological principles

The CA 3.0 is equipped with two guide edges which guide the double cone. SIMPLY SIMULATE NATURAL MOVEMENT. A vertical-sagittal one on the retrusion bar (red) and a horizontal-sagittal one on the joint disk (green). The vertical-sagittal edge on the retrusion bar touches the inner cone (red) whereas the horizontal-sagittal edge guides along the apex of the double cone (green). As a result, the double cone is not only guided into a physiological, three-dimensional movement via the horizontal guide edge of the joint disk (green), but also via the vertical guide edge on the retrusion bar (red)....

SUPPLEMENTARY KITS – WORKING FASTER WITH CRS REGISTRATION SETS. Inaccurate work may impair esthetics and function which then needs to be corrected painstakingly by grinding and reworking. Registrations by Candulor help you avoid this. NEW CRS 10 Set for McGrane‘s intraoral registration of the Gothic arch for full dentures CRS 15 Set for McGrane‘s intraoral registration of the Gothic arch for dentulous or partially dentulous jaws and for checking full dentures CRS 20 Set for intraoral jaw relationship determination for dentulous, partially dentulous jaws and full dentures. The CRS 20 gives...

TECHNICAL DATA • ISS: 0-2.5 mm fix • Angle of jaw path from 0°-60° • Incisal plate 15° • Weight: 690 g • Material: anodized aluminum • Color: silver Art. No. 90202510 EN 03/2014 3000 www.teama5.com © Copyright 2014 Candulor AG, Wangen/ZH • Bonnwill triangle 110 mm • Balkwill angle 25° • Height 150 mm, interior headroom 100 mm with model plates, without 115 mm, depth 160 mm, width 145 mm • Retrusion travel 1.5 mm DELIVERY FORM 1 x CA 3.0 1 x Incisal plate 15° 1 x Incisal point indicator 2 x Retention disks 2 x Model plates 1 x Name plate 1 x Support pin for upper part 2 x Gypsum sleeves 1 x...