CXDI-401
2Pages

CXDI-401 SERIES DR DETECTOR SPECIFICATIONS IMAGE SIZE RESOLUTION PIXEL PITCH IMAGE PREVIEW INCHES MEGAPIXELS MICRONS SECONDS 16.8 x 16.3 11.3 Detector CXDI-401C (CsI) DR Detector 3 125 CXDI-401G GOS (Gd2O2S: Tb) Scintillator CXDI-401C CsI (CsI:TI) Purpose Leverage the Power of Digital Radiography with a CXDI-401 Series DR Detector Method CXDI-401G Flat Panel Detector: Scintillator & Amorphous Silicon (a-Si) Sensor (GOS) DR Detector General Radiography LANMIT (Large Area New-MIS sensor and TFT) Pixels 3,320 x 3,408 pixels (11.3 megapixels) A/D 14-bit Grayscale 4,096 grayscale (12-bit) The versatility and reliability of the CXDI-401 Series In addition, DICOM modality worklist with MPPS High Resolution Image Display Time Approx. 5 seconds after X-ray exposure DR Detector expands the scope of Digital Radiography support and program imaging can help improve the Cycle Time Approx. 15 seconds after X-ray exposure with superb diagnostic image quality, rapid results, workflow of your department by interfacing with DICOM DICOM 3.0 compatible, Print Management Service Class (SCU), Storage Service Class (SCU), and others extensive networking capabilities and custom HIS/RIS Systems and facilitating effective integration Voltage AC 100 - 240 V 50/60 Hz configuration options. with your network. Operating Environment Sensor unit: 41-95°F (5 - 35°C), Humidity 30 - 80% RH (non-condensing) Network connectivity with DICOM® 3.0 compatibility Experience the high-resolution Digital Radiography Standard Components Sensor unit, power box, status indicator, X-ray interface cable enables efficient data transfer to any DICOM hard copy difference of Canon, with a CXDI-401 Series Dimensions (L x W x D) Sensor unit: 21.7 x 21.7 x 2.3 in. (550 x 550 x 59 mm) output device or PACS for efficient archiving, printing DR Detector. Weight 28 lbs (12.7 kg) and remote viewing. LOW DOSE Accelerating inSight. DRB-015 Rev. A * Compared to all other Digital Radiography Detectors as of August 5, 2011. CANON, CXDI and LANMIT are registered trademarks of Canon Inc. in the United States and may also be registered trademarks or trademarks of other countries. RadPRO is a registered trademark of Virtual Imaging, Inc., a Canon U.S.A. company, in the United States. DICOM is a registered trademark of the National Electrical Manufacturer’s Association for its standards publications relating to digital communications of medical information. All other referenced marks are trademarks of their respective owners and are hereby acknowledged. Specifications are subject to change without notice. © 2011 Canon U.S.A., Inc CANON MEDICAL SYSTEMS A Division of Canon U.S.A., Inc. 15955 Alton Parkway Irvine, CA 92618-3616, U.S.A Telephone: (800)970-7227, (949)753-4160 Fax: (949)753-4164 Email: drsales@cusa.canon.com Website: www.usa.canon.com/DR Lower Dose. Higher Resolution.*

Realize High Sensitivity, Low Dose Digital Imaging at at 125 Micron Pixel Pitch Software Developed for Optimal Workow Canon offers optimized, proprietary Engineered exclusively for Canon Digital Radiography scintillator technology in its re-imagined Flat Panel Detectors, the CXDI Control Software NE general flat panel fixed detectors — can be leveraged to optimize workflow, usability, the CXDI-401 Series Digital and flexibility with multiple study acquisitions and Thanks to a large imaging area of 16.8” x 16.3”, the tailored clinicial protocols. Radiography Detectors. CXDI-401 Series DR...