*mymedicalexpo

CXDI-401C

Product catalog summary

Detector Specifications
The detector uses a Cassette Size Detector with a Scintillator and Amorphous Silicon (a-Si). The scintillator is made of CsI (CsI: TI), and the sensor is a LANMIT (Large Area New-MIS sensor and TFT). It has a pixel pitch of 125 microns and approximately 11.3 megapixels (3,408 x 3,320 pixels). The imaging area measures 17 x 16 inches (42.6 x 41.5 cm).

Standard Configuration
The standard configuration includes a Sensor Unit, X-Ray Interface Box (optional), Battery Charger, Detector Check-In Unit, and a Wireless Access Point with A/C Power.

Battery Specifications
The battery recharge time is less than 3 hours, and it supports approximately 110-140 images per charge.

Image Acquisition and Processing
The system uses Standard Advanced Multi-Frequency Processing for image processing. It features a 16-bit A/D and selectable grayscale output of 12-bit or 16-bit. The preview image time is approximately 4-6 seconds after X-ray exposure, with full image display in approximately 6-9 seconds.

Data Output and Network Connection
The wireless standard is IEEE 802.11n, supporting both 5 GHz and 2.4 GHz frequencies. It is DICOM 3.0 compatible, supporting Print Management (SCU), Storage (SCU), MWL (SCU), and MPPS (SCU).

Electrical and Environmental Specifications
The operating environment for the sensor unit is between 41-95°F (5-35°C) with a humidity range of 30-80% RH (non-condensing).

Physical Characteristics
The dimensions of the detector unit are 18.1 x 18.1 x 0.6 inches (460 x 460 x 15 mm), and it weighs 8.4 lbs (3.8 kg) with the battery.

Specifications are subject to change without notice.

Catalog excerpts

Product Specifications Detector Method Scintillator Sensor Pixel Pitch Pixels Imaging Area Standard Configuration Cassette Size Detector, Scintillator & Amorphous Silicon (a-Si) CsI (CsI: TI) LANMIT (Large Area New-MIS sensor and TFT) 125 Microns 3,408 x 3,320 Pixels Approx. (11.3 Megapixels) 17 x 16 in (42.6 x 41.5 cm) Sensor Unit, X-Ray Interface Box (optional), Battery Charger, Detector Check-In Unit, Wireless Access Point (Including A/C Power) Battery Recharge Time Performance Less Than 3 Hours Approximately 110-140 images Image Acquisition and Processing Image Processing Standard Advanced Multi-Frequency Processing A/D 16-bit Grayscale Output 12-bit or 16-bit selectable Preview Image Time Approximately 4-6 Seconds After X-ray exposure Full Image Display Approximately 6-9 Seconds After X-ray exposure Data Output and Network Connection Wireless Standard IEEE 802.11n (5 GHz and 2.4 GHz) DICOM DICOM 3.0 Compatible, Print Management (SCU), Storage (SCU), MWL (SCU), MPPS (SCU) Electrical and Environmental Operating Sensor Unit: 41-95°F (5-35°C), Humidity 30-80% RH (nonEnvironment condensing) Physical Characteristics Dimensions (W x L x 18.1 x 18.1 x 0.6 in (460 x 460 x 15 mm) (Detector unit only) H) Weight 8.4 lbs (3.8 kg) (with battery) Specifications are subject to change without notice. © 2015 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.

Open the catalog to page 1

All Canon Medical System U.S.A catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list