Negative Pressure Sterile Containment

compounding aseptic containment isolator Designed to provide an ISo Class 5 (Class 100) clean air environment to meet the new and more stringent requirements of USP <797> for aseptic sterile compounding energy saver motor An ultra high efficiency motor saves on your energy bills while increasing filter life lowering your total cost of ownership shielded The unit incorporates a sealed glove box and interchange chamber, with 1/8 inch (optional 1/4 inch) of lead shielding to front door, sides, and floor sealed isolator Eliminates the costly requirement for placement in an exterior ISO Class 7 (Class...

SPECIFICATIONS Electrical/Control Panel Isolator: • Sealed glove box design with sealed interchange chamber • Unit shall maintain ISO Class 5 (Federal Standard 209E Class 100) within workzone and interchange chamber • Negative pressure, with sufficient interchange chamber pressure differential to maintain sterility in glove box • Interchange door is interlocked to prevent inadvertent opening when outer door is open • Two removable work trays with cove corners for main and interchange chambers • HEPA filter for supply air protected by non flammable perforated metal diffuser • HEPA filter seal...

OPTIONAL COMPONENTS CRC®-25R Dose Calibrator Item #5130-3215 2 Gallon Chemotherapy Sharps Containers: Item #0660-0022 Glove Port Clamps: Item #5500-0003 Nitrile Rubber Gloves (25 Pair): Small- Item #5500-0006 Medium- Item #5500-0007 Large- Item #5500-0008 X-Large- Item #5500-0009 Nitrile Rubber Sleeves: Item #5500-0004 6 Arrow Road, Ramsey, NJ 07446 • 201.825.9500 or 800.631.3826 • www.capintec.com , Capintec and CAP-Cell are registered trademarks of Capintec, Inc.