Catalogs >
Capintec >
CAPRAC ® -t Well Counting System

CAPRAC ® -t Well Counting System
1 / 4Pages

Catalog excerpts

Well Counting System Advanced Technology at Your Fingertips

Color LCD Touch screen Intuitive menu-driven 8” color VGA touch-screen interface when seconds count Rapid wipe tests in a minimum amount of time minimum detectable activity measurements Detects extremely low levels of activity with the accuracy only a NaI drilled-well detector can provide Provides measurements for wipe tests or laboratory samples Quality assurance, wipe and laboratory reports archived and available for recall at any time CAPRAC®-t Wipe Test/Well Counter- Item #5430-3136 SPECIFICIATIONS Performance • Type: 1.5” Sodium Iodine (NaI) drilled-well crystal • 256 Channel MCA...

Open the catalog to page 2

WELL AUTOCALIB RATE Calibration with Csl37 sets the voltage gain and establishes the FWHM for the detector using both the 32.5 kev and 662 kev peaks. Linearity correction with Eul52 applies correction fac- tors for the non-linear response of Nal crystals to different kev's detected by the crystal. This results in accurately centered peak detection for different nuclides. Linearity Correction Accept Cantei SAMPLE MEASUREMENT Isotope peaks found in sample measurements are compared to data in the isotope library to assist the user in the identification of the specific Count Time SYSTEM TEST...

Open the catalog to page 3

OPTIONAL COMPONENTS Epson Roll Printer Item #5430-0058 Protective Screen Covers: Item #7900-0352 Well Auxiliary Shield: Item #5420-2141 Roll Paper: Item #9282-0009 Well Liners: Item #5420-0121 Auxiliary Shield: Item #5420-2072 6 Arrow Road, Ramsey, NJ 07446 • 201.825.9500 or 800.631.3826 • www.capintec.com , Capintec and CAPRAC are registered trademark

Open the catalog to page 4

CAPRAC ® -t Well Counting System 1 / 4Pages

Catalog excerpts

All Capintec catalogs and technical brochures

CAPRAC ® -t Well Counting System
1 / 4Pages