CdPP RonDoHIGH SPEED REFRIGERATED CENTRIFUGE CAPP Rondo High Speed Refrigerated Centrifuge operates to a maximum speed of 17.000 RPM, corresponding to 27.237 x g. It's an ideal centrifuge for molecular and cellular applications, such as ethanol precipitation, phenol extraction, NA preparation, cell collection or spin-down of temperature-sensitive reaction mixtures. CAPP Rondo High Speed Refrigerated Centrifuge offers a maximum rotor capacity of 30 microtubes (18 microfilter tubes or 64 PCR tubes). Its operating temperature range is from -20°C to +40°C. The samples are cooled down to the temperature of 4°C in just 5 minutes. The chamber is rust-free and Teflon-coated. The compressor-off function prevents any unnecessary cooling and frosting while the lid is open. As with all CAPP Rondo instruments, the High Speed Refrigerated Centrifuge offers quiet operation, keeping the noise level at only 56 dB. The parameters can be changed upon operation unless the Key Lock Function is activated. CAPP Rondo High Speed Refrigerated Centrifuge offers multiple rotor options. Max. RPM / Fixed angle 17.000 RPM Max. RCF / Fixed angle 27.237 x g Max. capacity / Fixed angle 30 x 1.5 / 2.0mL, 8 PCR strips Max. capacity / Swing-out 4 x 4 x 1.5 / 2.0mL Temp range (oC) -20oC to +40oC FAST cool button Yes Time control Pulse, timed <100 min, or continuous Time counting range Selectable, at set speed or from starting RCF/RPM conversion Yes Noise level <56 dB (dependent on rotor) Acc. time to max. speed <17 sec Dec. time from max. speed <15 sec ACC/DEC ramps 9/10 Parameters on display RPM(RCF), Operating window Status, Door Open/Close, Min:Sec, Temp, (ACC), (DEC) Display Blue LCD Rotor Identification Automatic optional) Power requirement (VA) 2KVA Weight without rotor 43kg

CR-17-24 Fixed angle rotor of CR-1730R for 24 x 1.5mL / 2.0mL microtubes. 45°, Hole diameter 11.1mm, Max. height for tube fit 52mm. Supplied with O-ring sealed. Fixed angle rotor of CR-1730R for 30 x 1.5mL / 2.0mL microtubes. 45°, Hole diameter 11.1mm, Max. height for tube fit 52mm. Supplied with O-ring sealed. CR-17-18 Fixed angle rotor of CR-1730R for 18 x 1.5mL / 2.0mL i 45°, Hole diameter 11.1mm, 1 Max. height for tube fit 65mm. Supplied with O-ring sealed. Fixed angle rotor of CR-1730R for 12 x 5mL for screw and snap cap microtubes.^ 45°, Hole diameter 17mm, Max. height for tube fit 64mm....