• Improved Modulus of Elasticity: The CarboFix nails, made from CFR-PEEK, offer an improved modulus of elasticity compared to traditional materials like titanium (Ti-6AI-4V) and stainless steel (316L).
• Unparalleled Fatigue Strength: CarboFix nails demonstrate superior fatigue strength, withstanding up to 4,000,000 cycles without failure, compared to titanium and stainless steel which fail at significantly lower cycles.
• Enhanced Imaging Capabilities: The nails provide clear imaging of adjacent tissues during MRI procedures without artifacts, aiding in both intra-operative and post-operative imaging.
• Advantageous for Pathological Fractures: The design and material properties make these nails particularly beneficial in treating pathological fractures.

• Humerus Nail: Shaft diameter of 8.5mm, proximal diameter of 10.0mm, available in lengths from 180mm to 280mm, with proximal screws of 4.5mm and distal screws of 3.5mm.
• Proximal Humerus Nail: Shaft diameter of 8.0mm, proximal diameter of 11.0mm, length of 150mm, with proximal screws of 4.5mm and distal screws of 3.5mm.

• U.S.A. Office: CarboFix Orthopedics, Inc., 506 Halle Park Drive, Suite 102, Collierville, TN 38017, USA. Tel: 1-800-408-0120, Fax: 901-850 1339, Email: [email protected]
• EC Authorized Representative: MEDNET GmbH, Borkstrasse 10, 48163 Münster, Germany.
• Manufactured By: CarboFix Orthopedics Ltd., 11 Ha’hoshlim St., Herzeliya, Israel, 46724. Tel: +972-9-9511511, Fax: +972-9-9548939, Email: [email protected]

In the U.S.A., federal law restricts this device to sale by or on the order of a physician. Patents are pending.