Exhibit with us
*mymedicalexpo  
English
  1. Catalogs
  2. Carbon Inc.
  3. DPR 10
video corpo

DPR 10

DPR 10
1 / 2 PagesView full catalog

DPR 10

Product catalog summary
Overview: The document provides technical specifications and guidelines for the use of DPR 10, a production-grade material by Carbon, Inc., suitable for manufacturing dental models and other high-accuracy applications.
Material Specifications:
  • Tensile Properties: Tested under ASTM D638 Type V with a tensile modulus of 1800 MPa (260 ksi), ultimate tensile strength of 45 MPa (6 ksi), and elongation at break of 4%.
  • Flexural Properties: Measured using ASTM D790-B with a flexural stress at 5% strain of 80 MPa (11 ksi) and a flexural modulus of 2000 MPa (290 ksi).
  • Impact Properties: Notched Izod (ASTM D256) at 20 J/m (0.4 ft-lb/in) and Notched Charpy (ISO 179-1/1eA) at 1.7 kJ/m² (0.8 ft-lb/in²).
  • Thermal Properties: Heat deflection temperature at 0.455 MPa is 60 °C (140 °F) and at 1.82 MPa is 45 °C (113 °F).
  • Liquid Properties: Liquid density is 1.11 g/mL and viscosity at 25 °C is 1700 cP.
Usage and Limitations:
  • The document emphasizes that the provided values are approximations and should not be used for testing, design specification, or quality control purposes.
  • Material performance can vary based on design, processing, color treatment, and other conditions.
  • Specifications are subject to change without notice, and the responsibility for safe and lawful use lies with the user.
  • No warranties are provided, and users assume all liability for the use of Carbon products.
Processing Information: Parts were processed using an M series printer and a Smart Part Washer with VF 1 solvent, and post-cured with Dreve PCU LED or Dreve PCU 90 models.
See more

Catalog excerpts

DPR 10-1

DPR 10 DPR 10 is a production-grade material suitable for manufacturing dental models and other applications where high accuracy is needed. © 2019 - 2022 Carbon, Inc. All rights reserved.

 Open the catalog to page 1
DPR 10-2

Tensile Properties Flexural Properties Impact Properties Thermal Properties Liquid Properties The information in this document includes values derived from printing various parts, reflects an approximation of the mean value of a range of values, and is intended for reference and comparison purposes only. This information should not be used for testing, design specification or quality control purposes. End-use material performance can be impacted by, but not limited to, design, processing, color treatment, operating and end-use conditions, test conditions, etc. Actual values will vary with build...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.