L. Eurospec SW316 Lever
12Pages

{{requestButtons}}

Catalog excerpts

L. Eurospec SW316 Lever - 1

© EUROSPEC STEELWORX® SW316 GRADE 4 LEVERS RANGE

Open the catalog to page 1
L. Eurospec SW316 Lever - 2

Cover Illustration

Open the catalog to page 2
L. Eurospec SW316 Lever - 3

Introduction Eurospec is a brand of Carlisle Brass used for commercially orientated hardware. Eurospec levers are designed to provide beautifully engineered stainless steel commercial door hardware for the specification market. The SW range will provide a cost effective stainless steel solution that can be used both commercially or for residential projects. Eurospec brand products include: High specification hinges, Door control mechanisms, Panic hardware, Cylinder locks, Mortice locks and latches Carlisle Brass Ltd. is an ISO 9001 and ISO 14001 certified company, which means that Eurospec...

Open the catalog to page 3
L. Eurospec SW316 Lever - 4

Eurospec SW316 Grade 4 Levers Range Eurospec is an accredited product range, tested to the most stringent industry regulations, providing reassurance in quality and standard. Levers on Rose •> 100% recyclable packaging ( box and inner material all able to be ethically disposed of - boxes are usually recyclable). •> Independently tested to severe Grade 4 under BS EN 1906. •> For use on fire-rated and smoke protection doors to BS EN 1634 for both timber and steel doors. •> Products designed to guidelines within BS 8300 - 2:2018. •> 25 year mechanical guarantee. •> Case-hardened spindle with...

Open the catalog to page 4
L. Eurospec SW316 Lever - 6

SW4123SSS 19mm Diameter Safety Lever on Sprung Threaded Rose 55x8mm Satin Also available SW4123X/SSS SW4125SSS 19mm Diameter Mitred Lever on Sprung Threaded Rose 55x8mm Satin

Open the catalog to page 6
L. Eurospec SW316 Lever - 7

SW4140SSS 22mm Diameter DDA Ellipse Lever on Sprung Threaded Rose 55x8mm Satin

Open the catalog to page 7
L. Eurospec SW316 Lever - 8

SW4141SSS 22mm Diameter DDA Curvilinear Lever on Sprung Threaded Rose 55x8mm Satin SW4150SSS 19mm Diameter DDA Ambulant Lever on Sprung Threaded Rose 55x8mm Satin

Open the catalog to page 8
L. Eurospec SW316 Lever - 9

SW316 Grade 4 Lever Accessories Large Turn and Coin Release with Indicator 55x8mm SSS Small Turn and Coin Release with Indicator 55x8mm SSS Lever Escutcheon Threaded Rose 55x8mm Satin Euro Escutcheon Threaded Rose 55x8mm Satin

Open the catalog to page 9
L. Eurospec SW316 Lever - 10

Digit 5 - Safety Grade 0: Normal use Grade 1: Safety application - to qualify for this grade, handles must have high strength handle-to-plate and plate-to-door fixing and/or handle-to-spindle fixing, such that they would withstand a person grabbing in order to prevent falling. It is recommended that only Safety Grade 1 furniture is used at the top of cellar steps or other staircases. Digit 1 - Category of Use Grade 1: Medium frequency of use with a high incentive to exercise care and a small chance of misuse, e.g. internal residential doors; Grade 2: Medium frequency of use by people...

Open the catalog to page 10
L. Eurospec SW316 Lever - 11

Care of Finishes Stainless steel needs to be cleaned for aesthetic considerations and to preserve corrosion resistance. Stainless steel is protected by a thin layer of chromium oxide. Oxygen from the atmosphere combines with chromium in stainless steel to form a passive chromium oxide film that protects from further corrosion. Any contamination of the surface by dirt or other material hinders this passivation process and traps corrosive agents, reducing corrosion protection. Thus some form of routine cleaning is necessary to preserve the appearance and integrity of the surface. They...

Open the catalog to page 11

All Carlisle Brass catalogs and technical brochures

  1. J. Middle East

    140 Pages