AQUASNAP® 30MPA,MPW015-045 Liquid Chillers with Scroll Compressors and ComfortLink Controls Product Data AquaSnap packaged liquid and condenserless chillers feature a rugged, compact modular design for quick and easy installation. This single-circuit modular chiller covers a wide range of applications from ice to heat recovery and various combinations can be easily combined to meet the required plant capacity. Flexible modular design, compact size, and user friendly controls make the 30MP chillers an optimal choice for reliable cooling. Value-added features include: • • • • • • • • rotary scroll compression HFC Puron® refrigerant (R-410A) low sound easy to use ComfortLink controls application flexibility energy efficiency modular design optional digital scroll compressors Features/Benefits Easy to install, scroll chillers offer cost-effective and reliable cooling. a30-5030 Installation ease The 30MP units are designed to reduce installation time and costs. They arrive at the jobsite able to fit easily through a standard 36-in. (762 mm) door opening due to their compact design. The 30MP units include fork pockets in the frame for use with forklifts or pallet jacks. Optional mobility and height adjustment kits allow units to quickly roll into place and mate with existing piping. Mobility kit wheels are rubber type, pivot for easy unit maneuvering, and are lockable for safety. * Meets IBC 2006, ASCE-7-05, CBC 2007, and OSHPD seismic requirements. © Carrier Corporation 2012

Features/Benefits (cont) The 30MP height adjustment kit provides a height adjustment mechanism located in each corner of the unit to aid in leveling and facilitate connection to existing piping. The ability to roll the 30MP chiller into most elevators and through most doors combined with the ability to adjust the unit height to match existing piping helps significantly to lower installation expense. The 30MP units come complete with an insulated evaporator, condenser (30MPW), compressors, controls, refrigerant charge (30MPW), TXV (thermostatic expansion valve), filter drier, sight glass, entering...

SCROLL COMPRESSOR Run Status Service Test Temperature Pressures Setpoints Configuration Time Clock Alarm Status Operating Modes SCROLLING MARQUEE CLEAR LANGUAGE DISPLAY Table of contents Page Features/Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Model Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AHRI Capacity Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Model number nomenclature 30MP A 030 6 0 - Condenser Option A – Chiller without Condenser (Air-Cooled) W – Chiller with Condenser (Water-Cooled) Packaging Options 5 – Bag, No Compressor Insulation (Std) 7 – Bag, Compressor Insulation B – Export Crating, No Compressor Insulation D – Export Crating, Compressor Insulation Controls/Interface Options 0 – Scrolling Marquee Display (Std) 5 – Scrolling Marquee Display, EMM 30MP – AquaSnap® Liquid Chiller with ComfortLink Controls Voltage Options 1 – 575-3-60 2 – 380-3-60 5 – 208/230-3-60 6 – 460-3-60 Sound/Mounting Options 0 – None 1 – Sound Enclosure...

AHRI capacity ratings AHRI RATINGS (60 Hz only) AHRI— Air Conditioning, Heating and Refrigeration Institute EER — Energy Efficiency Ratio IPLV — Integrated Part Load Value 1. Certified (60 Hz unit) in accordance with AHRI Standard 550/590 at standard rating conditions. 2. Standard rating conditions are as follows: Evaporator Conditions: Leaving Water Temperature: 44 F (6.7 C) Condenser Conditions: Entering Water Temperature: 85 F (29.4 C) Fouling Factor (Evaporator): Fouling Factor (Condenser): 3. IPLV is a single number part load efficiency value calculated from the system full load efficiency...

Physical data 30MPA AIR-COOLED AND 30MPW LIQUID-COOLED UNITS — ENGLISH UNIT 30MPA,MPW NOMINAL TONS OPERATING WT (lb) MPA MPW REFRIGERANT (lb) MPA* MPW COMPRESSOR Quantity Speed (rpm) Compressor Nominal Tons Oil Charge (pt) Capacity Control — Standard No. of Steps Minimum Step Capacity (%) Capacity Control — Optional Hot Gas Bypass No. of Steps Minimum Step Capacity (%) Capacity Control — Optional Digital Compressor No. of Steps Minimum Step Capacity (%) EVAPORATOR Weight (lb, empty) Net Fluid Volume (gal.) Maximum Refrigerant Pressure (psig) Maximum Fluid-Side Pressure (psig) Water Connections...

30MPA AIR-COOLED AND 30MPW LIQUID-COOLED UNITS — SI UNIT 30MPA,MPW NOMINAL kW OPERATING WT (kg) MPA MPW REFRIGERANT (kg) MPA* MPW COMPRESSOR Quantity Speed (r/s) Compressor Nominal kW Oil Charge (L) Capacity Control — Standard No. of Steps Minimum Step Capacity (%) Capacity Control — Optional Hot Gas Bypass No. of Steps Minimum Step Capacity (%) Capacity Control — Optional Digital Compressor No. of Steps Minimum Step Capacity (%) EVAPORATOR Weight (kg, empty) Net Fluid Volume (L) Maximum Refrigerant Pressure (kPa) Maximum Fluid-Side Pressure (kPa) Water Connections (in.) Inlet and Outlet (Victaulic)...

Options and accessories ITEM Digital Scroll Compressor (not available on 30MPA,MPW015 models) High Interrupt Vibration Isolators (Pads) Vibration Isolators (Springs) BACnet Translator Non-Fused Disconnect Sound Enclosure Panels Medium Temperature Brine Condenser Water Temperature Sensors Height Adjustment (Leveling) Kit Compressor Return Gas Sensor Navigator™ Display Module Remote Enhanced Display Compressor Insulation Compressor Sound Blankets Water Manifold Piping Water Manifold Victaulic Spacer Fitting Kit *Factory-installed option. †Field-installed accessory. Factory-installed options Hot...

Condenser water temperature sensors — This accessory allows measurement of condenser water entry and leaving temperatures. Sound enclosure panels — This accessory is an acoustically insulated sheet metal enclosure installed around the unit to reduce radiated sound levels. Panels are also available as a factory-installed option for all 30MP units. Energy management module (EMM) — The Energy management module is used for 4 to 20 mA leaving fluid temperature reset, cooling set point reset, 4 to 20 mA demand limit and two-step demand limit. Temperature reset lets the unit reset the leaving fluid...