i-Vu® Building Automation System i-Vu® CCN Router Part Number: CIV-CR The i-Vu® Building Automation System provides everything you need to access, manage, and control your building, including the powerful i-Vu user interface, plug-and-play BACnet® controllers, and state-of-the-art Carrier equipment. where it interfaces with other CCN communication buses in order to extend a CCN within a campus or building. Because the i-Vu CCN Router allows for the use of existing LAN wiring, it is an ideal solution for integrating CCN into any building or facility. The i-Vu CCN Router has one EIA-485 port for connecting to the CCN bus, and one 10/100Base-T Ethernet port for connecting to the building LAN. Each i-Vu CCN Router can connect to up to 140 CCN devices. The i-Vu CCN Router also stores trend data and time schedules for the CCN devices that are connected to it. The i-Vu CCN Router provides scalability for larger Carrier systems. It connects an Ethernet-based Local Area Network (LAN) to the Carrier Comfort Network (CCN). The i-Vu CCN Router can be used in two different configurations. It can either serve as a Gateway, where it gives the i-Vu web server residing on the Ethernet LAN access to the entire CCN, or it can function as a Bridge, The i-Vu Building Automation System ALARM WARMER WARM IDEAL COOL COOLER ALARM Mobile Devices i-Vu CCN Router Sensor Wire Sensor Wire Sensor Wire Sensor Wire Sensor Wire Hardwired Equipment Functions The i-Vu CCN Router functions in one of the following modes, depending on configuration: • Gateway - Provides access to the CCN bus from an i-Vu web server that resides on the Ethernet. The Router is serving as the access node from the Ethernet to the CCN and is responsible for maintaining a routing table of CCN system elements. • Bridge - Acts as a CCN/Ethernet interface device in applications where the Ethernet is being used to connect separate CCN buses. This application requires an additional Router functioning as a Gateway. Each i-Vu CCN Router has a static Internet Protocol (IP) address. This IP address can be set using the CCN Network Service

i-Vu® Building Automation System i-Vu® CCN Router Part Number: CIV-CR Communication Ports Port E1: 10/100 BaseT Ethernet port for LAN and BACnet IP communications; Port S1 (CCN): EIA-485 port for CCN Network and/or CCN Service Tool connection (9600 bps & 38.4 kbps) Incoming power and network connections are protected by non-replaceable internal solid-state polyswitches that reset themselves when the condition that causes a fault returns to normal. The power and network connections are also protected against voltage transient and surge events. Real-Time Clock Battery-backed real-time clock 10-year...